BMW Automotive Colours

All colours will come as "Standard" Shade unless stated. Other shades available on request. 

All colours are Mixed 1-1 with Thinner

• Valencia Orange - Paint Code WB44
• Sparkling Graphit - Paint Code WA22
• Le Mans Blau - Paint Code 381
• Estoril Blue - Paint Code 335
• Techno Violet - Paint Code 299
• Calypso Red - Paint Code 252
• Dark Graphit - Paint Code 919
• Diamond Black - Paint Code 181
• San Mario Blau - Paint Code WB51
• Frozen Silver - Paint Code WW07
• Montegiesschwarz - Paint Code A37
• Monacoblau - Paint Code A35
• Arkis - Paint Code A34
• Pearl Silber 2 - Paint Code 907
• Urban Green - Paint Code YA04
• Highland gruen - Paint Code WA11
• Diamant - Paint Code WA10
• Silbergrau - Paint Code WA08
• MysticBlau - Paint Code Wa07
• Merlorot - Paint Code WA02
• Ontario Gold - Paint Code U57
• Smeraldo - Paint Code S02
• Aurum - Paint Code S01
• Aspen White - Paint Code 899/ NUH
• Malediven Blue 2 - Paint Code A15
• Moccabraun - Paint Code 891
• Sepang Silver - Paint Code WA32
• Interlago Blau - Paint Code WA30
• Cool Blue - Paint Code WA27
• Hot Orange - Paint Code WA26
• Sonara - Paint Code WA23
• Sydney Blau - Paint Code WA19
• Havana - Paint Code WA17
• Mineral Silber - Paint Code WA14
• Atlantic Blue - Paint Code WA13
• Jet Black - Paint Code 668
• Brasilbraun - Paint Code 154
• Sakhir Orange - Paint Code WB50

This colour will dry to a flat finish and will require a 2K Clear coat.

1000's of other colours available, Please contact us with the name and paint code of the colour you require, if you can not see your colour listed.

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Dodge automotive colors

All colours will come as "Standard" Shade unless stated. Other shades available on request.

• Plum Crazy - Paint Code FHG
• TorRed - Paint Code PR3
• Sublime - Paint Code FFB
• Furious Fuchsia - Paint Code GHP
• Billet Silver - Paint Code PSC
• Granite Crystal - Paint Code LAU

This colour will dry to a flat finish and will require a 2K Clear coat.

1000's of other colours available, Please contact us with the name and paint code of the colour you require, if you can not see your colour listed.  

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Cans for 3-5 minutes.
• Apply 2-4 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying Clearcoat..
• Apply our 2K Show Clear Aerosol Canz for a Real Deep Gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Cans for 3-5 minutes.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Apply 2-4 coats of mid coat depending on the desire colour required. Leave 10-15 minutes between coats. Leave 60 minutes before applying Clearcoat.
• Apply our 2K Show Clear Aerosol Canz for a Real Deep Gloss finish.

2K MS Crystal Clear is a top quality, 2 Pack acrylic clear coat, suitable for air-drying or baking, which gives a brilliant and durable gloss to various types of basecoat.

It has excellent application properties, is quick drying, has good chemical resistance and is easy to polish.

It may be used where small areas or complete vehicles are to be painted.

This 2 pack clear lacquer is the ideal product for the fast throughput body shop.

Should you need to remove dust from the finish we have also tested the ease of removing imperfections and polishing with a number of systems from Farecla G3 and 3M Fast Cut with fast and easy to achieve results.

Mixing Ratio is 2 parts Clear to 1 part Activator (2:1) with up to 10% Thinner if required.

250 Sheets

Solvent wipes, also known as “Meltblown Polypropylene” or “Crows Foot” wipes, are designed to clean surfaces.

A solid and durable wipe that is lint free, designed for use with solvents and chemicals and is very absorbent with oil and grease.

Ideal for pre-cleaning and degreasing surfaces prior to painting and is a similar material to the Kimtech wipe.

Description:

Our Pearls are the very best on the planet. Our Pearls exhibit the brightest and most vivid colours. Apply our Pearls over any Base colour to produce a real custom effect.

For best performance use Custom Paints Reducer and Mix 2-1

Pearl Paint Kits:

Pearl Kits Will Include:

• Base White
• Pearl Colour
• D-Thinner
• 2K Clearcoat + Activator

Pearl Colours:

• Blue Pearl
• Gold Pearl
• Green Pearl
• Indigo Pearl
• Orange Pearl
• Magenta Pearl
• Purple Pearl
• Red Pearl
• Silver Pearl
• Solid Copper Pearl
• Solid Rich Gold Pearl
• Turquoise Pearl

Pearl CANZ:

Our award winning Pearls are now available in an aerosol can. Pearl CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or Spray Gun cleaning.

To get the best result from Pearl CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Pearls are easy to apply and can even be applied with an airbrush. Apply Pearls over any colour Basecoat, but Pearl colours can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat.
• Mix Pearl 2-1 with Reducer and stir well.
• Apply 2-4 coats of Pearl depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply 2K Show Clear for a Real Deep Gloss finish.

Description:

Our Pearls are the very best on the planet. Our Pearls exhibit the brightest and most vivid colours. Apply our Pearls over any Base colour to produce a real custom effect.

For best performance use Custom Paints Reducer and Mix 2-1

Pearl Paint Kits:

Pearl Kits Will Include:

• Base White
• Pearl Colour
• D-Thinner
• 2K Clearcoat + Activator

Pearl Colours:

• Blue Pearl
• Gold Pearl
• Green Pearl
• Indigo Pearl
• Orange Pearl
• Magenta Pearl
• Purple Pearl
• Red Pearl
• Silver Pearl
• Solid Copper Pearl
• Solid Rich Gold Pearl
• Turquoise Pearl

Pearl CANZ:

Our award winning Pearls are now available in an aerosol can. Pearl CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or Spray Gun cleaning.

To get the best result from Pearl CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Pearls are easy to apply and can even be applied with an airbrush. Apply Pearls over any colour Basecoat, but Pearl colours can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat.
• Mix Pearl 2-1 with Reducer and stir well.
• Apply 2-4 coats of Pearl depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply 2K Show Clear for a Real Deep Gloss finish.

Description

Schultz Gun:

• 【Car Undercoating Spray Gun】--- The car undercoating spray gun allows you to easily spray to the hard-to-reach area of the bottom of the car, making your painting work easier and more convenient. It is an essential spray tool for cars.

• 【Excellent Quality】--- The car undercoating spray gun is made of high-quality and durable aluminium metal. It adopts two processes of heat and cold treatment, which has good corrosion resistance and longer service life.

• 【User-friendly Design】--- This car primer spray gun is lightweight, weight only 400g, and easy to operate. The comfortable grip design is very suitable for your hands, making your painting work easier and more efficient.

• 【The Best Choice for Car Paint】--- The maximum output pressure of this paint spray gun is 150PSI, the paint spraying volume is 270ml per second, and the spraying distance is 200mm. It is very suitable for painting the bottom of cars, and can also be used in furniture, ships, machinery and other fields.

Metal Flake: Solid Flake Colours

Custom Paints Metal Flakes are the HIGHEST grade you can buy, there are ultra thin, easy to smooth out and have outstanding sparkle. Our Metal Flakes are solvent proof and wont fade in sunlight as they have a high uv coating on them. we have had 1000's of customers use our flakes and continue using us all the time. Apply our Metal Flakes over any base colour to produce a real custom effect. The Metal Flake can be added to solvent or water based Lacquers, Clear base coats, Resins and can also be used for Arts n Crafts.

Metal Flake Application: "Dry Flake"

Apply our Holographic Metal Flakes over any base colour to produce a real custom effect but most customers use a black Basecoat. We recommend adding the Holographic Metal Flake to our Flake Carrier but you can add them to a Automotive solvent or water based Clearcoats, Clear basecoats and Resin's. Depending on how heavy you want the flake effect, will depend on how much you will need.

Always spray test panels before spraying you product or project to see the effect you desire.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Base coat.
• Add the Holographic Metal Flake to a Clear base coat or lacquer and stir well.
• Apply the Holographic Metal Flake until you get the effect you desire. 
• Apply a Clearcoat until the Holographic Metal Flake is fully covered.

Metal Flake Fx Application: "Paint"

METAL FLAKE FX is an EASY to apply Metal Flake paint. Metal Flake FX is highly concentrated with our Metal Flake and full coverage can be achieved with in a few coats, which then can be 2K clear coated or be used as a base for our Candy effect paints.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying the effect colour to ensure basecoat is fully dry.
• Stir paint well before adding Reducer. Mix Metal Flake Fx 2-1 with Reducer & stir well.
• Apply 2-5 coats of Metal Flake Fx depending on the effect you desire. Leave 20-30 minutes between coats. Ensure its fully 
• Leave 60 minutes before applying a 2k Clearcoat.

Spray Gun Size for Metal Flake:

(SMF) Small Flake is our fine cut flake at .004 x .004 hex. SMF flake size can be sprayed through most large size tip airbrushes, as well as HVLP full and detail sized spray gun equipment with a 1.0 nozzle set-up or larger. SMF lays down much flatter then MMF, LMF and XMF so it's easier to finish with clear.

(MMF) Medium Flake is our medium cut flake at .008 x .008 hex. MMF flake size has a sparkling brilliance that is easy to use. MMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.3 nozzle set-up or larger.

(LMF) Large Flake is our large cut flake at .015 x .015 hex. LMF flake size has double the amount of sparkling brilliance of the LMF and has been used in the custom market for many years. LMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.6 nozzle set-up or larger.

(XMF) Extra Large Flake is our extra large cut flake at .025 x .025 hex. XMF is an extreme size flake gives a extreme amount of sparkle. XMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 2.2 nozzle set-up or larger.

Metal Flake: Solid Flake Colours

Custom Paints Metal Flakes are the HIGHEST grade you can buy, there are ultra thin, easy to smooth out and have outstanding sparkle. Our Metal Flakes are solvent proof and wont fade in sunlight as they have a high uv coating on them. we have had 1000's of customers use our flakes and continue using us all the time. Apply our Metal Flakes over any base colour to produce a real custom effect. The Metal Flake can be added to solvent or water based Lacquers, Clear base coats, Resins and can also be used for Arts n Crafts.

Metal Flake Application: "Dry Flake"

Apply our Holographic Metal Flakes over any base colour to produce a real custom effect but most customers use a black Basecoat. We recommend adding the Holographic Metal Flake to our Flake Carrier but you can add them to a Automotive solvent or water based Clearcoats, Clear basecoats and Resin's. Depending on how heavy you want the flake effect, will depend on how much you will need.

Always spray test panels before spraying you product or project to see the effect you desire.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Base coat.
• Add the Holographic Metal Flake to a Clear base coat or lacquer and stir well.
• Apply the Holographic Metal Flake until you get the effect you desire. 
• Apply a Clearcoat until the Holographic Metal Flake is fully covered.

Metal Flake Fx Application: "Paint"

METAL FLAKE FX is an EASY to apply Metal Flake paint. Metal Flake FX is highly concentrated with our Metal Flake and full coverage can be achieved with in a few coats, which then can be 2K clear coated or be used as a base for our Candy effect paints.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying the effect colour to ensure basecoat is fully dry.
• Stir paint well before adding Reducer. Mix Metal Flake Fx 2-1 with Reducer & stir well.
• Apply 2-5 coats of Metal Flake Fx depending on the effect you desire. Leave 20-30 minutes between coats. Ensure its fully 
• Leave 60 minutes before applying a 2k Clearcoat.

Spray Gun Size for Metal Flake:

(SMF) Small Flake is our fine cut flake at .004 x .004 hex. SMF flake size can be sprayed through most large size tip airbrushes, as well as HVLP full and detail sized spray gun equipment with a 1.0 nozzle set-up or larger. SMF lays down much flatter then MMF, LMF and XMF so it's easier to finish with clear.

(MMF) Medium Flake is our medium cut flake at .008 x .008 hex. MMF flake size has a sparkling brilliance that is easy to use. MMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.3 nozzle set-up or larger.

(LMF) Large Flake is our large cut flake at .015 x .015 hex. LMF flake size has double the amount of sparkling brilliance of the LMF and has been used in the custom market for many years. LMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.6 nozzle set-up or larger.

(XMF) Extra Large Flake is our extra large cut flake at .025 x .025 hex. XMF is an extreme size flake gives a extreme amount of sparkle. XMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 2.2 nozzle set-up or larger.

Holographic Metal Flake:

Our Holographic Metal Flakes are one of the finest flakes available. They shimmer through a rainbow of colours when viewed at different angles. Apply our Holographic Metal Flakes over any base colour to produce a real custom effect. The Metal Flake can be added to solvent or water based Lacquers, Clear base coats, Varnish and can also be used for Arts n Crafts.

The Holographic Metal Flakes are available in Medium (.008 Hex) and Large (.015 Hex).

Metal Flake Application: "Dry Flake"

Apply our Holographic Metal Flakes over any base colour to produce a real custom effect but most customers use a black Basecoat. We recommend adding the Holographic Metal Flake to our Flake Carrier but you can add them to a Automotive solvent or water based Clearcoats, Clear basecoats and Resin's. Depending on how heavy you want the flake effect, will depend on how much you will need.

Always spray test panels before spraying you product or project to see the effect you desire.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Base coat.
• Add the Holographic Metal Flake to a Clear base coat or lacquer and stir well.
• Apply the Holographic Metal Flake until you get the effect you desire. 
• Apply a Clearcoat until the Holographic Metal Flake is fully covered.

Metal Flake Fx Application: "Paint"

METAL FLAKE FX is an EASY to apply Metal Flake paint. Metal Flake FX is highly concentrated with our Metal Flake and full coverage can be achieved with in a few coats, which then can be 2K clear coated or be used as a base for our Candy effect paints.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying the effect colour to ensure basecoat is fully dry.
• Stir paint well before adding Reducer. Mix Metal Flake Fx 2-1 with Reducer & stir well.
• Apply 2-5 coats of Metal Flake Fx depending on the effect you desire. Leave 20-30 minutes between coats. Ensure its fully 
• Leave 60 minutes before applying a 2k Clearcoat.

Spray Gun Size for Metal Flake:

(SMF) Small Flake is our fine cut flake at .004 x .004 hex. SMF flake size can be sprayed through most large size tip airbrushes, as well as HVLP full and detail sized spray gun equipment with a 1.0 nozzle set-up or larger. SMF lays down much flatter then MMF, LMF and XMF so it's easier to finish with clear.

(MMF) Medium Flake is our medium cut flake at .008 x .008 hex. MMF flake size has a sparkling brilliance that is easy to use. MMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.3 nozzle set-up or larger.

(LMF) Large Flake is our large cut flake at .015 x .015 hex. LMF flake size has double the amount of sparkling brilliance of the LMF and has been used in the custom market for many years. LMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.6 nozzle set-up or larger.

(XMF) Extra Large Flake is our extra large cut flake at .025 x .025 hex. XMF is an extreme size flake gives a extreme amount of sparkle. XMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 2.2 nozzle set-up or larger.

Description:

Base Pearlz have a massive depth of colour and a shimmering iridescence that leaves other Basecoats looking lifeless, dull and boring! Our Base Pearlz have an extreme amount of Pearl luster!

Base Pearlz come in a wide range of colours. They can be simply top coated or used as a basecoat for our Candy, Liquid, Passion or any of our other effect coatings.

For best performance use Custom Paints D-Thinner and Mix 2-1

Base Pearlz Paint Kits:

Base Pearlz Kits Will Include:

• Base Colour
• Base Pearlz Colour
• D-Thinner
• 2K Show Clear & Activator

Base Pearlz Colours:

• Blue Grape (Best used over White Base)
• Blue Ocean (Best used over White Base)
• Bondi Beaches (Best used over Blue Waves Base)
• Champagne Pink (Best used over White Base)
• Coconut (Best used over Black Base)
• Daytona Beaches (Best used over Mint Green Base)
• Fizzy Pink (Best used over White Base)
• Honey (Best used over White Base)
• Hot Salsa (Best used over White Base)
• Key West (Best used over Blue Waves Base)
• Miami Pink (Best used over Pink Base)
• Monza Red (Best used over Red Base)
• Novak Purple   (Best used over White Base) 
• Orange Fusion (Best used over White Base)
• Oriental Blue (Best used over White Base)
• Peachy King (Best used over White Base) 
• Pineapple (Best used over White Base)
• Pink Fantasy (Best used over White Base)
• Purple Lust (Best used over White Base)
• Purple Surfer (Best used over White Base)
• Purple Velvet (Best used over White Base)
• Sky Black (Best used over Black Base)
• Snow White (Best used over White Base)
• Sugar Apple (Best used over White Base)
• Sunburst (Best used over White Base)
• Tobago Bay (Best used over Blue Waves Base)

Base Pearlz CANZ:

Our award winning Base Pearlz are now available in an aerosol can. CANZ give high output with excellent atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or spray gun cleaning.

To get the best result from Base Pearlz CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Base Pearlz coatings are easy to apply and can even be applied with an airbrush. For best results use a White Primer or a White Basecoat.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job (Sand, Prime, etc.) in a White Primer or Basecoat specified.
• Apply 2-3 coats of Basecoat leaving 10 - 15 minutes between coats. Leave 60 minutes before applying effect colour.
• Mix Base Pearlz 2-1 with D-Thinner and stir well.
• Apply 2-4 coats of Base Pearlz depending on the effect you desire, leaving 15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply 2K Show Clear for a real deep gloss finish.

Customers Projects:

Base Pearlz Sugar Apple
     

Description:

Base Pearlz have a massive depth of colour and a shimmering iridescence that leaves other Basecoats looking lifeless, dull and boring! Our Base Pearlz have an extreme amount of Pearl luster!

Base Pearlz come in a wide range of colours. They can be simply top coated or used as a basecoat for our Candy, Liquid, Passion or any of our other effect coatings.

For best performance use Custom Paints D-Thinner and Mix 2-1

Base Pearlz Paint Kits:

Base Pearlz Kits Will Include:

• Base Colour
• Base Pearlz Colour
• D-Thinner
• 2K Show Clear & Activator

Base Pearlz Colours:

• Blue Grape (Best used over White Base)
• Blue Ocean (Best used over White Base)
• Bondi Beaches (Best used over Blue Waves Base)
• Champagne Pink (Best used over White Base)
• Coconut (Best used over Black Base)
• Daytona Beaches (Best used over Mint Green Base)
• Fizzy Pink (Best used over White Base)
• Honey (Best used over White Base)
• Hot Salsa (Best used over White Base)
• Key West (Best used over Blue Waves Base)
• Miami Pink (Best used over Pink Base)
• Monza Red (Best used over Red Base)
• Novak Purple   (Best used over White Base) 
• Orange Fusion (Best used over White Base)
• Oriental Blue (Best used over White Base)
• Peachy King (Best used over White Base) 
• Pineapple (Best used over White Base)
• Pink Fantasy (Best used over White Base)
• Purple Lust (Best used over White Base)
• Purple Surfer (Best used over White Base)
• Purple Velvet (Best used over White Base)
• Sky Black (Best used over Black Base)
• Snow White (Best used over White Base)
• Sugar Apple (Best used over White Base)
• Sunburst (Best used over White Base)
• Tobago Bay (Best used over Blue Waves Base)

Base Pearlz CANZ:

Our award winning Base Pearlz are now available in an aerosol can. CANZ give high output with excellent atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or spray gun cleaning.

To get the best result from Base Pearlz CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Base Pearlz coatings are easy to apply and can even be applied with an airbrush. For best results use a White Primer or a White Basecoat.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job (Sand, Prime, etc.) in a White Primer or Basecoat specified.
• Apply 2-3 coats of Basecoat leaving 10 - 15 minutes between coats. Leave 60 minutes before applying effect colour.
• Mix Base Pearlz 2-1 with D-Thinner and stir well.
• Apply 2-4 coats of Base Pearlz depending on the effect you desire, leaving 15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply 2K Show Clear for a real deep gloss finish.

Customers Projects:

Base Pearlz Sugar Apple
     

Description:

Base Pearlz have a massive depth of colour and a shimmering iridescence that leaves other Basecoats looking lifeless, dull and boring! Our Base Pearlz have an extreme amount of Pearl luster!

Base Pearlz come in a wide range of colours. They can be simply top coated or used as a basecoat for our Candy, Liquid, Passion or any of our other effect coatings.

For best performance use Custom Paints D-Thinner and Mix 2-1

Base Pearlz Paint Kits:

Base Pearlz Kits Will Include:

• Base Colour
• Base Pearlz Colour
• D-Thinner
• 2K Show Clear & Activator

Base Pearlz Colours:

• Blue Grape (Best used over White Base)
• Blue Ocean (Best used over White Base)
• Bondi Beaches (Best used over Blue Waves Base)
• Champagne Pink (Best used over White Base)
• Coconut (Best used over Black Base)
• Daytona Beaches (Best used over Mint Green Base)
• Fizzy Pink (Best used over White Base)
• Honey (Best used over White Base)
• Hot Salsa (Best used over White Base)
• Key West (Best used over Blue Waves Base)
• Miami Pink (Best used over Pink Base)
• Monza Red (Best used over Red Base)
• Novak Purple   (Best used over White Base) 
• Orange Fusion (Best used over White Base)
• Oriental Blue (Best used over White Base)
• Peachy King (Best used over White Base) 
• Pineapple (Best used over White Base)
• Pink Fantasy (Best used over White Base)
• Purple Lust (Best used over White Base)
• Purple Surfer (Best used over White Base)
• Purple Velvet (Best used over White Base)
• Sky Black (Best used over Black Base)
• Snow White (Best used over White Base)
• Sugar Apple (Best used over White Base)
• Sunburst (Best used over White Base)
• Tobago Bay (Best used over Blue Waves Base)

Base Pearlz CANZ:

Our award winning Base Pearlz are now available in an aerosol can. CANZ give high output with excellent atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or spray gun cleaning.

To get the best result from Base Pearlz CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Base Pearlz coatings are easy to apply and can even be applied with an airbrush. For best results use a White Primer or a White Basecoat.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job (Sand, Prime, etc.) in a White Primer or Basecoat specified.
• Apply 2-3 coats of Basecoat leaving 10 - 15 minutes between coats. Leave 60 minutes before applying effect colour.
• Mix Base Pearlz 2-1 with D-Thinner and stir well.
• Apply 2-4 coats of Base Pearlz depending on the effect you desire, leaving 15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply 2K Show Clear for a real deep gloss finish.

Customers Projects:

Base Pearlz Sugar Apple
     

LDV Paint Colours

Custom Paints Ltd can offer a large range of colours for the LDV including there hard to find special effects colours.

1000's of other colours available, If the colour you require is not listed please contact us with the colour name and paint code. You can contact us via email and telephone which is listed below:

Email - uk@custompaints.com

Telephone - 0114 275 2187

All colours will come as "Standard" Shade unless stated. Other shades available on request. 

"3 Stage" colours:  Price will include Base colour and mid coat.

LDV Paint Colours;

A001 - Lava Grey Metallic

B002 - Sapphire Blue Met

E002 - Olive Green Met

SA2C - Concrete Grey Mica

R001 - Post Office Red

B001 - Ocean Blue Met

F007 - Obsidian Black

L001 - Aurora Silver Met

M001 - Blanc White

H001 - Olive Brown Met

This colour will dry to a flat finish and will require a 2K Clear coat.

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

BMW Automotive Colours

All colours will come as "Standard" Shade unless stated. Other shades available on request. 

All colours are Mixed 1-1 with Thinner

• Valencia Orange - Paint Code WB44
• Sparkling Graphit - Paint Code WA22
• Le Mans Blau - Paint Code 381
• Estoril Blue - Paint Code 335
• Techno Violet - Paint Code 299
• Calypso Red - Paint Code 252
• Dark Graphit - Paint Code 919
• Diamond Black - Paint Code 181
• San Mario Blau - Paint Code WB51
• Frozen Silver - Paint Code WW07
• Montegiesschwarz - Paint Code A37
• Monacoblau - Paint Code A35
• Arkis - Paint Code A34
• Pearl Silber 2 - Paint Code 907
• Urban Green - Paint Code YA04
• Highland gruen - Paint Code WA11
• Diamant - Paint Code WA10
• Silbergrau - Paint Code WA08
• MysticBlau - Paint Code Wa07
• Merlorot - Paint Code WA02
• Ontario Gold - Paint Code U57
• Smeraldo - Paint Code S02
• Aurum - Paint Code S01
• Aspen White - Paint Code 899/ NUH
• Malediven Blue 2 - Paint Code A15
• Moccabraun - Paint Code 891
• Sepang Silver - Paint Code WA32
• Interlago Blau - Paint Code WA30
• Cool Blue - Paint Code WA27
• Hot Orange - Paint Code WA26
• Sonara - Paint Code WA23
• Sydney Blau - Paint Code WA19
• Havana - Paint Code WA17
• Mineral Silber - Paint Code WA14
• Atlantic Blue - Paint Code WA13
• Jet Black - Paint Code 668
• Brasilbraun - Paint Code 154
• Sakhir Orange - Paint Code WB50

This colour will dry to a flat finish and will require a 2K Clear coat.

1000's of other colours available, Please contact us with the name and paint code of the colour you require, if you can not see your colour listed.

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Yamaha Motorcycle Colours

All colours will come as "Standard" Shade unless stated. Other shades available on request.

Three Stage colour. Price will include Base colour and mid coat.

• Vivid Purplish Blue Cocktail 5 - Paint code 1177
• Ocean Depth - Paint Code 996
• Red - Paint Code 4XV
• White - Paint Code GWC1 - Three Stage color. Price will include Base color and mid coat.
• Bright Red - Paint Code 63-8880-1
• Genesis Black - Paint Code BL2
• Orange - Paint Code LGM3 - Three Stage color. Price will include Base color and mid coat.
• Lava Red - Paint Code DRMK - Three Stage color. Price will include Base color and mid coat.
• Dark Purplish Blue - Paint Code 996

Colours will dry to a dull finish and will require a 2K Clear coat.

1000's of other colours available, Please contact us with the name and paint code of the colour you require, if you can not see your colour listed.

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying 2K Clearcoat..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats. Leave 60 minutes before applying 2K Clearcoat.
• Apply our 2K Show Clear for a Real Deep Gloss finish.
3

Yamaha Motorcycle Colours

All colours will come as "Standard" Shade unless stated. Other shades available on request.

Three Stage colour. Price will include Base colour and mid coat.

• Vivid Purplish Blue Cocktail 5 - Paint code 1177
• Ocean Depth - Paint Code 996
• Red - Paint Code 4XV
• White - Paint Code GWC1 - Three Stage color. Price will include Base color and mid coat.
• Bright Red - Paint Code 63-8880-1
• Genesis Black - Paint Code BL2
• Orange - Paint Code LGM3 - Three Stage color. Price will include Base color and mid coat.
• Lava Red - Paint Code DRMK - Three Stage color. Price will include Base color and mid coat.
• Dark Purplish Blue - Paint Code 996

Colours will dry to a dull finish and will require a 2K Clear coat.

1000's of other colours available, Please contact us with the name and paint code of the colour you require, if you can not see your colour listed.

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying 2K Clearcoat..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats. Leave 60 minutes before applying 2K Clearcoat.
• Apply our 2K Show Clear for a Real Deep Gloss finish.
3

Indian motorcycle colors

All colors will come as "Standard" Shade unless stated. Other shades available on request.

• Springfield Blue
• Thunder Black - Paint Code 937549
• Red - Paint Code 937550

Colours will dry to a flat finish and will require a 2K Clearcoat.

1000's of other colours available, Please contact us with the name and paint code of the colour you require, if you can not see your colour listed.

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Cans for 3-5 minutes.
• Apply 2-4 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying Clearcoat..
• Apply our 2K Show Clear Aerosol Canz for a real deep gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Cans for 3-5 minutes.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Apply 2-4 coats of mid coat depending on the desire colour required. Leave 10-15 minutes between coats. Leave 60 minutes before applying Clearcoat.
• Apply our 2K Show Clear Aerosol Canz for a real deep gloss finish.

Chevrolet automotive colors

All colours will come as "Standard" Shade unless stated. Other shades available on request.

• Rally Yellow - Paint Code GCO
• Synergy Green - Paint Code GHS
• Aqua Blue - Paint Code GBD
• Red Hot - Paint Code 62U
• Inferno Orange - Paint Code WA502Q
• Gunmetal - Paint Code WAPB9243
• Butternut - Paint Code WA3313
• Grotto Blue - Paint Code WA3700
• White Diamond - Paint Code GBN Three Stage colour. Price will include Base colour and mid coat.

This colour will dry to a flat finish and will require a 2K Clear coat.

1000's of other colours available, Please contact us with the name and paint code of the colour you require, if you can not see your colour listed.  

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Cans for 3-5 minutes.
• Apply 2-4 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying Clearcoat..
• Apply our 2K Show Clear Aerosol Canz for a Real Deep Gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Cans for 3-5 minutes.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Apply 2-4 coats of mid coat depending on the desire colour required. Leave 10-15 minutes between coats. Leave 60 minutes before applying Clearcoat.
• Apply our 2K Show Clear Aerosol Canz for a Real Deep Gloss finish.

2K 4:1 HS Compliant Primer (Grey) is a top quality, 2 pack acrylic primer-filler, available in Grey, it contains anti-corrosive pigments and is chromate free.

It has excellent application properties, is quick drying and is easy to sand.

It is suitable for many different substrates including correctly prepared bare steel, fiberglass and sound original finishes.

It is suitable for use under a wide variety of topcoats particularly 2K acrylics and basecoat / clear systems.

After testing this product in a busy Body shop we are please to offer you a very versatile primer that can be applied without thinner for very high build or with thinner to aid flow for normal repairs or wet on wet application.

Its fast drying and very easy to sand and doesn't shrink back – suitable for air dry, low bake and Infra Red drying

Isolate-it - Ready for use paint sealer is a quick drying yellow oxide isolator.

It is designed to prevent lifting and bleeding of existing paint film sensitive to solvent attack when over coated with cellulose or paint containing strong solvent.

Does not need thinning and is ready to go out of the can

An easy-to-use tool designed for applying the 50ml 2K Bonding products, this 2K Glue, Sealer, and Foam Applicator Gun ensures an even and efficient application of sealers and adhesives in various applications.

Description:

Our Sparkle Pearls are the very best on the planet. Sparkle Pearls exhibit the brightest and most vivid colours due to their large size and give a sparkle effect in bright light/sun light. Sparkle Pearls are like no other pearls on the market as each colour gives off colours within the colour pearl. Apply Sparkle Pearls over any Basecoat colour to produce a real custom effect.

For best performance use Custom Paints Reducer and Mix 2-1

Sparkle Pearl Paint Kits:

Sparkle Pearl Kits Will Include:

• Base Black
• Sparkle Pearl Colours
• D-Thinner
• 2K Clearcoat + Activator

Sparkle Pearl Colours:

• Blue Sparkle Pearl
• Copper Sparkle Pearl
• Fire Gold Pearl
• Gold Sparkle Pearl
• Green Sparkle Pearl
• Purple Sparkle Pearl
• Rainbow Sparkle Pearl
• Red Sparkle Pearl
• Silver Sparkle Pearl
• Super Copper Pearl
• Turquoise Sparkle Pearl

Sparkle Pearl CANZ:

Our award winning Sparkle Pearl is now available in a aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or Spray Gun cleaning.

To get the best result from Sparkle Pearl CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Sparkle Pearl is easy to apply and can even be applied with an airbrush. Apply Sparkle Pearl over any colour Basecoat. Sparkle Pearl colours can also be mixed with our other products: Candy, Spectracoat, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Mix Sparkle Pearl 2-1 with Reducer and stir well.
• Apply 2-4 coats of Sparkle Pearl depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Our top selling LVLP (low volume low pressure) high transfer efficiency gravity feed top coat spray gun.

Suitable for water and solvent based paints.

Operates with a very low air consumption, just 4.2-6cfm depending on the setup specified. Ideal for those with smaller compressors.

Can be used with 3M disposable pot system, use adaptor number 2 (3M code 16032).

Colour coded for easy setup identification.

A well balanced and high performing gun.

Our top selling LVLP (low volume low pressure) high transfer efficiency gravity feed top coat spray gun.

Suitable for water and solvent based paints.

Operates with a very low air consumption, just 4.2-6cfm depending on the setup specified. Ideal for those with smaller compressors.

Can be used with 3M disposable pot system, use adaptor number 2 (3M code 16032).

Colour coded for easy setup identification.

A well balanced and high performing gun.

MIPA HS F37

2K WET ON WET FILLER PRIMER 3L

Light Grey

Mipa 2K-HS-NiN-Füller F 37 is a high-quality wet-on-wet filler that offers excellent features for efficient coatings. 

Intact, sound e-coatings can be overcoated with F 37 without any pre-sanding.

Its fast re-coatability and universal adhesion, even on plastic, are further advantages of the new wet-on-wet filler.

• excellent spray mist absorption
• re-coatable after 15 min
• no sagging

Mixing ratio: 5:1    Hardener: H10, MS 10

Hardener included

Metal Flake: Solid Flake Colours

Custom Paints Metal Flakes are the HIGHEST grade you can buy, there are ultra thin, easy to smooth out and have outstanding sparkle. Our Metal Flakes are solvent proof and wont fade in sunlight as they have a high uv coating on them. we have had 1000's of customers use our flakes and continue using us all the time. Apply our Metal Flakes over any base colour to produce a real custom effect. The Metal Flake can be added to solvent or water based Lacquers, Clear base coats, Resins and can also be used for Arts n Crafts.

Metal Flake Application: "Dry Flake"

Apply our Holographic Metal Flakes over any base colour to produce a real custom effect but most customers use a black Basecoat. We recommend adding the Holographic Metal Flake to our Flake Carrier but you can add them to a Automotive solvent or water based Clearcoats, Clear basecoats and Resin's. Depending on how heavy you want the flake effect, will depend on how much you will need.

Always spray test panels before spraying you product or project to see the effect you desire.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Base coat.
• Add the Holographic Metal Flake to a Clear base coat or lacquer and stir well.
• Apply the Holographic Metal Flake until you get the effect you desire. 
• Apply a Clearcoat until the Holographic Metal Flake is fully covered.

Metal Flake Fx Application: "Paint"

METAL FLAKE FX is an EASY to apply Metal Flake paint. Metal Flake FX is highly concentrated with our Metal Flake and full coverage can be achieved with in a few coats, which then can be 2K clear coated or be used as a base for our Candy effect paints.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying the effect colour to ensure basecoat is fully dry.
• Stir paint well before adding Reducer. Mix Metal Flake Fx 2-1 with Reducer & stir well.
• Apply 2-5 coats of Metal Flake Fx depending on the effect you desire. Leave 20-30 minutes between coats. Ensure its fully 
• Leave 60 minutes before applying a 2k Clearcoat.

Spray Gun Size for Metal Flake:

(SMF) Small Flake is our fine cut flake at .004 x .004 hex. SMF flake size can be sprayed through most large size tip airbrushes, as well as HVLP full and detail sized spray gun equipment with a 1.0 nozzle set-up or larger. SMF lays down much flatter then MMF, LMF and XMF so it's easier to finish with clear.

(MMF) Medium Flake is our medium cut flake at .008 x .008 hex. MMF flake size has a sparkling brilliance that is easy to use. MMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.3 nozzle set-up or larger.

(LMF) Large Flake is our large cut flake at .015 x .015 hex. LMF flake size has double the amount of sparkling brilliance of the LMF and has been used in the custom market for many years. LMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.6 nozzle set-up or larger.

(XMF) Extra Large Flake is our extra large cut flake at .025 x .025 hex. XMF is an extreme size flake gives a extreme amount of sparkle. XMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 2.2 nozzle set-up or larger.

Holographic Metal Flake:

Our Holographic Metal Flakes are one of the finest flakes available. They shimmer through a rainbow of colours when viewed at different angles. Apply our Holographic Metal Flakes over any base colour to produce a real custom effect. The Metal Flake can be added to solvent or water based Lacquers, Clear base coats, Varnish and can also be used for Arts n Crafts.

The Holographic Metal Flakes are available in Medium (.008 Hex) and Large (.015 Hex).

Metal Flake Application: "Dry Flake"

Apply our Holographic Metal Flakes over any base colour to produce a real custom effect but most customers use a black Basecoat. We recommend adding the Holographic Metal Flake to our Flake Carrier but you can add them to a Automotive solvent or water based Clearcoats, Clear basecoats and Resin's. Depending on how heavy you want the flake effect, will depend on how much you will need.

Always spray test panels before spraying you product or project to see the effect you desire.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Base coat.
• Add the Holographic Metal Flake to a Clear base coat or lacquer and stir well.
• Apply the Holographic Metal Flake until you get the effect you desire. 
• Apply a Clearcoat until the Holographic Metal Flake is fully covered.

Metal Flake Fx Application: "Paint"

METAL FLAKE FX is an EASY to apply Metal Flake paint. Metal Flake FX is highly concentrated with our Metal Flake and full coverage can be achieved with in a few coats, which then can be 2K clear coated or be used as a base for our Candy effect paints.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying the effect colour to ensure basecoat is fully dry.
• Stir paint well before adding Reducer. Mix Metal Flake Fx 2-1 with Reducer & stir well.
• Apply 2-5 coats of Metal Flake Fx depending on the effect you desire. Leave 20-30 minutes between coats. Ensure its fully 
• Leave 60 minutes before applying a 2k Clearcoat.

Spray Gun Size for Metal Flake:

(SMF) Small Flake is our fine cut flake at .004 x .004 hex. SMF flake size can be sprayed through most large size tip airbrushes, as well as HVLP full and detail sized spray gun equipment with a 1.0 nozzle set-up or larger. SMF lays down much flatter then MMF, LMF and XMF so it's easier to finish with clear.

(MMF) Medium Flake is our medium cut flake at .008 x .008 hex. MMF flake size has a sparkling brilliance that is easy to use. MMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.3 nozzle set-up or larger.

(LMF) Large Flake is our large cut flake at .015 x .015 hex. LMF flake size has double the amount of sparkling brilliance of the LMF and has been used in the custom market for many years. LMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.6 nozzle set-up or larger.

(XMF) Extra Large Flake is our extra large cut flake at .025 x .025 hex. XMF is an extreme size flake gives a extreme amount of sparkle. XMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 2.2 nozzle set-up or larger.

Description:

Chromacoat shifting effect changes colour right before your eyes. Chromacoat finishes are based on the revolutionary ChromaFlair Colour shifting colorants. These are unique colorants that offers previously unattainable colour performance, they actually change colour depending on the angle from which they are viewed. More than just a subtle variation in shade, the colour undergoes an almost magical transformation in appearance. On rounded curved surfaces and sharp angles will highlight the magical appearance of Chromacoat.

For best performance use Custom Paints Reducer and Mix 2-1

Chromacoat Paint Kits:

Chromacoat Kits Will Include:

• Base Black
• Chromacoat Colour
• D-Thinner
• 2K Show Clear & Activator
  

Chromacoat Colours:

• Chromacoat Autumn Spice - Shifts from Copper Orange - Gold - Green
• Chromacoat Blue - Shifts from Blue - Red - Gold
• Chromacoat Copper - Shifts from Copper - Blue - Purple
• Chromacoat Cyan - Shifts from Cyan - Purple - Gold
• Chromacoat Fireball - Shifts from Black - Red - Gold
• Chromacoat Flamingo - Shifts from Purple - Pink - Gold - Green
• Chromacoat Gold - Shifts From Gold - Silver
• Chromacoat Golden Night - Shifts from Gold - Silver - Blue
• Chromacoat Green - Shifts from Green - Blue - Purple - Gold
• Chromacoat Heather - Shifts from Pinky Purple - Blue - Violet
• Chromacoat Key Lime - Shifts from Gold - Green - Blue - Purple
• Chromacoat Peacock - Shifts from Green - Blue - Purple - Green
• Chromacoat Purple - Shifts from Purple - Green - Violet
• Chromacoat Red - Shifts From Red - Gold
• Chromacoat Silver - Shifts from Silver - Green - Purple
• Chromacoat Siren - Shifts from Silver - Green - Blue - Purple
• Chromacoat Smokin Charcoal - Shifts from Dark Purple - Grey - Green - Blue - Violet
  
• Chromacoat Sunrise - Shifts from Gold - Silver - Purple
• Chromacoat Swift Green - Shifts from Green - Blue
• Chromacoat Voodoo - Shifts from Purple - Green

Chromacoat CANZ:

Our award winning Chromacoat is now available in an aerosol can. Chromacoat CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

To get the best result from Chromacoat CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Chromacoat is easy to apply and can even be applied with an airbrush. For best results use a Black Basecoat but using different colours will give you a real custom effect. Chromacoat can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Mix Chromacoat 2-1 with Reducer and stir well.
• Apply 2-5 coats of Chromacoat depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Description:

Base Pearlz have a massive depth of colour and a shimmering iridescence that leaves other Basecoats looking lifeless, dull and boring! Our Base Pearlz have an extreme amount of Pearl luster!

Base Pearlz come in a wide range of colours. They can be simply top coated or used as a basecoat for our Candy, Liquid, Passion or any of our other effect coatings.

For best performance use Custom Paints D-Thinner and Mix 2-1

Base Pearlz Paint Kits:

Base Pearlz Kits Will Include:

• Base Colour
• Base Pearlz Colour
• D-Thinner
• 2K Show Clear & Activator

Base Pearlz Colours:

• Blue Grape (Best used over White Base)
• Blue Ocean (Best used over White Base)
• Bondi Beaches (Best used over Blue Waves Base)
• Champagne Pink (Best used over White Base)
• Coconut (Best used over Black Base)
• Daytona Beaches (Best used over Mint Green Base)
• Fizzy Pink (Best used over White Base)
• Honey (Best used over White Base)
• Hot Salsa (Best used over White Base)
• Key West (Best used over Blue Waves Base)
• Miami Pink (Best used over Pink Base)
• Monza Red (Best used over Red Base)
• Novak Purple   (Best used over White Base) 
• Orange Fusion (Best used over White Base)
• Oriental Blue (Best used over White Base)
• Peachy King (Best used over White Base) 
• Pineapple (Best used over White Base)
• Pink Fantasy (Best used over White Base)
• Purple Lust (Best used over White Base)
• Purple Surfer (Best used over White Base)
• Purple Velvet (Best used over White Base)
• Sky Black (Best used over Black Base)
• Snow White (Best used over White Base)
• Sugar Apple (Best used over White Base)
• Sunburst (Best used over White Base)
• Tobago Bay (Best used over Blue Waves Base)

Base Pearlz CANZ:

Our award winning Base Pearlz are now available in an aerosol can. CANZ give high output with excellent atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or spray gun cleaning.

To get the best result from Base Pearlz CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Base Pearlz coatings are easy to apply and can even be applied with an airbrush. For best results use a White Primer or a White Basecoat.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job (Sand, Prime, etc.) in a White Primer or Basecoat specified.
• Apply 2-3 coats of Basecoat leaving 10 - 15 minutes between coats. Leave 60 minutes before applying effect colour.
• Mix Base Pearlz 2-1 with D-Thinner and stir well.
• Apply 2-4 coats of Base Pearlz depending on the effect you desire, leaving 15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply 2K Show Clear for a real deep gloss finish.

Customers Projects:

Base Pearlz Sugar Apple
     

Description:

Base Pearlz have a massive depth of colour and a shimmering iridescence that leaves other Basecoats looking lifeless, dull and boring! Our Base Pearlz have an extreme amount of Pearl luster!

Base Pearlz come in a wide range of colours. They can be simply top coated or used as a basecoat for our Candy, Liquid, Passion or any of our other effect coatings.

For best performance use Custom Paints D-Thinner and Mix 2-1

Base Pearlz Paint Kits:

Base Pearlz Kits Will Include:

• Base Colour
• Base Pearlz Colour
• D-Thinner
• 2K Show Clear & Activator

Base Pearlz Colours:

• Blue Grape (Best used over White Base)
• Blue Ocean (Best used over White Base)
• Bondi Beaches (Best used over Blue Waves Base)
• Champagne Pink (Best used over White Base)
• Coconut (Best used over Black Base)
• Daytona Beaches (Best used over Mint Green Base)
• Fizzy Pink (Best used over White Base)
• Honey (Best used over White Base)
• Hot Salsa (Best used over White Base)
• Key West (Best used over Blue Waves Base)
• Miami Pink (Best used over Pink Base)
• Monza Red (Best used over Red Base)
• Novak Purple   (Best used over White Base) 
• Orange Fusion (Best used over White Base)
• Oriental Blue (Best used over White Base)
• Peachy King (Best used over White Base) 
• Pineapple (Best used over White Base)
• Pink Fantasy (Best used over White Base)
• Purple Lust (Best used over White Base)
• Purple Surfer (Best used over White Base)
• Purple Velvet (Best used over White Base)
• Sky Black (Best used over Black Base)
• Snow White (Best used over White Base)
• Sugar Apple (Best used over White Base)
• Sunburst (Best used over White Base)
• Tobago Bay (Best used over Blue Waves Base)

Base Pearlz CANZ:

Our award winning Base Pearlz are now available in an aerosol can. CANZ give high output with excellent atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or spray gun cleaning.

To get the best result from Base Pearlz CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Base Pearlz coatings are easy to apply and can even be applied with an airbrush. For best results use a White Primer or a White Basecoat.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job (Sand, Prime, etc.) in a White Primer or Basecoat specified.
• Apply 2-3 coats of Basecoat leaving 10 - 15 minutes between coats. Leave 60 minutes before applying effect colour.
• Mix Base Pearlz 2-1 with D-Thinner and stir well.
• Apply 2-4 coats of Base Pearlz depending on the effect you desire, leaving 15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply 2K Show Clear for a real deep gloss finish.

Customers Projects:

Base Pearlz Sugar Apple
     

Description:

Base Pearlz have a massive depth of colour and a shimmering iridescence that leaves other Basecoats looking lifeless, dull and boring! Our Base Pearlz have an extreme amount of Pearl luster!

Base Pearlz come in a wide range of colours. They can be simply top coated or used as a basecoat for our Candy, Liquid, Passion or any of our other effect coatings.

For best performance use Custom Paints D-Thinner and Mix 2-1

Base Pearlz Paint Kits:

Base Pearlz Kits Will Include:

• Base Colour
• Base Pearlz Colour
• D-Thinner
• 2K Show Clear & Activator

Base Pearlz Colours:

• Blue Grape (Best used over White Base)
• Blue Ocean (Best used over White Base)
• Bondi Beaches (Best used over Blue Waves Base)
• Champagne Pink (Best used over White Base)
• Coconut (Best used over Black Base)
• Daytona Beaches (Best used over Mint Green Base)
• Fizzy Pink (Best used over White Base)
• Honey (Best used over White Base)
• Hot Salsa (Best used over White Base)
• Key West (Best used over Blue Waves Base)
• Miami Pink (Best used over Pink Base)
• Monza Red (Best used over Red Base)
• Novak Purple   (Best used over White Base) 
• Orange Fusion (Best used over White Base)
• Oriental Blue (Best used over White Base)
• Peachy King (Best used over White Base) 
• Pineapple (Best used over White Base)
• Pink Fantasy (Best used over White Base)
• Purple Lust (Best used over White Base)
• Purple Surfer (Best used over White Base)
• Purple Velvet (Best used over White Base)
• Sky Black (Best used over Black Base)
• Snow White (Best used over White Base)
• Sugar Apple (Best used over White Base)
• Sunburst (Best used over White Base)
• Tobago Bay (Best used over Blue Waves Base)

Base Pearlz CANZ:

Our award winning Base Pearlz are now available in an aerosol can. CANZ give high output with excellent atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or spray gun cleaning.

To get the best result from Base Pearlz CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Base Pearlz coatings are easy to apply and can even be applied with an airbrush. For best results use a White Primer or a White Basecoat.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job (Sand, Prime, etc.) in a White Primer or Basecoat specified.
• Apply 2-3 coats of Basecoat leaving 10 - 15 minutes between coats. Leave 60 minutes before applying effect colour.
• Mix Base Pearlz 2-1 with D-Thinner and stir well.
• Apply 2-4 coats of Base Pearlz depending on the effect you desire, leaving 15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply 2K Show Clear for a real deep gloss finish.

Customers Projects:

Base Pearlz Sugar Apple
     

MG Rover Paint Colours

Custom Paints Ltd can offer a large range of colours for the MG Rover including there hard to find special effects colours.

If you unable to find your colour, please call us to with the paint code and the name of the colour.

All colours will come as "Standard" Shade unless stated. Other shades available on request. 

MG Rover "MONOGRAM" effect Colours. (Made to MG Rover Strength) 

This colour will dry to a flat finish and will require a 2K Clear coat.

1000's of other colours available, Please contact us with the name and paint code of the colour you require, if you can not see your colour listed.

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Porsche Automotive Colours

All colours will come as "Standard" Shade unless stated. Other shades available on request.

• Cognac Metallic - Paint Code M8Z
• Light Yellow - Paint Code 117
• Grand Prix White - Paint Code 908
• Mint Green - Paint Code N4
• Pure Red - Paint Code P3G

Colours will dry to a flat finish and will require a 2K Clearcoat.

1000's of other colours available, Please contact us with the name and paint code of the colour you require, if you can not see your colour listed.

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying 2K Clearcoat..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats. Leave 60 minutes before applying 2K Clearcoat.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

BMW Automotive Colours

All colours will come as "Standard" Shade unless stated. Other shades available on request. 

All colours are Mixed 1-1 with Thinner

• Valencia Orange - Paint Code WB44
• Sparkling Graphit - Paint Code WA22
• Le Mans Blau - Paint Code 381
• Estoril Blue - Paint Code 335
• Techno Violet - Paint Code 299
• Calypso Red - Paint Code 252
• Dark Graphit - Paint Code 919
• Diamond Black - Paint Code 181
• San Mario Blau - Paint Code WB51
• Frozen Silver - Paint Code WW07
• Montegiesschwarz - Paint Code A37
• Monacoblau - Paint Code A35
• Arkis - Paint Code A34
• Pearl Silber 2 - Paint Code 907
• Urban Green - Paint Code YA04
• Highland gruen - Paint Code WA11
• Diamant - Paint Code WA10
• Silbergrau - Paint Code WA08
• MysticBlau - Paint Code Wa07
• Merlorot - Paint Code WA02
• Ontario Gold - Paint Code U57
• Smeraldo - Paint Code S02
• Aurum - Paint Code S01
• Aspen White - Paint Code 899/ NUH
• Malediven Blue 2 - Paint Code A15
• Moccabraun - Paint Code 891
• Sepang Silver - Paint Code WA32
• Interlago Blau - Paint Code WA30
• Cool Blue - Paint Code WA27
• Hot Orange - Paint Code WA26
• Sonara - Paint Code WA23
• Sydney Blau - Paint Code WA19
• Havana - Paint Code WA17
• Mineral Silber - Paint Code WA14
• Atlantic Blue - Paint Code WA13
• Jet Black - Paint Code 668
• Brasilbraun - Paint Code 154
• Sakhir Orange - Paint Code WB50

This colour will dry to a flat finish and will require a 2K Clear coat.

1000's of other colours available, Please contact us with the name and paint code of the colour you require, if you can not see your colour listed.

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Kawasaki Motorcycle Colours

All colours will come as "Standard" Shade unless stated. Other shades available on request.

Three Stage colours: Price will include Base colour and mid coat.

• Candy Burnt Orange - Paint Code 17L - Three Stage colour. Price will include Base colour and mid coat.
• Candy Lime - Paint Code 8N - Three Stage colour. Price will include Base colour and mid coat.
• Persimmon Red - Three Stage colour. Price will include Base colour and mid coat.
• Candy Plasma Blue - Three Stage colour. Price will include Base colour and mid coat.
• Braun Three Stage colour. Price will include Base colour and mid coat.
• Galaxy Silver - Paint Code 474
• Gold
• White Pearl
• Lime Green
• Diablo Black
• Silver
• Terra Blue
• Sapphire Blue - Paint Code 19A
• Sunbeam Red - Paint Code 22

Colours will dry to a dull finish and will require a 2K Clear coat.

1000's of other colours available, Please contact us with the name and paint code of the colour you require, if you can not see your colour listed.

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying 2K Clearcoat..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats. Leave 60 minutes before applying 2K Clearcoat.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Harley Davidson motorcycle colours

All colors will come as "Standard" Shade unless stated. Other shades available on request.

Three Stage color. Price will include Base color and mid coat.

• Deep Cobalt - Paint Code 60807
• Mirage Orange - Paint Code EX60783 Three Stage color. Price will include Base color and mid coat.
• Big Blue Pearl - Paint Code 930849
• Fire Red - Paint Code 61711
• Melot Sunglo
• Smokey Gold
• Psychedelic Purple - Paint Code SAC10P24A
• Black Pearl - Paint Code EX12B38
• Cool Blue - Paint Code EX11L23
• Chrome Yellow - Paint Code SAC67509
• Scarlet Red - Paint Code SAC60630A
• Spiced Rum - Paint Code 119
• Brilliant Silver - Paint Code EX60294
• Black Denim - Paint Code S28664
• Pewter Silver - Paint Code 7A54
• Olive - Paint Code 7G52
• Flame Blue - Paint Code 10155
• Dark Orange - Paint Code DA92838
• Sedona Orange - Paint Code EX11J39
• Chopper Blue - Paint Code CH64210
• Black Cherry - Paint Code EX60839
• Yellow - Paint Code 60918 Three Stage color. Price will include Base color and mid coat.
• Gunmetal Gray - Paint Code S28734
• Beige
• White - Paint Code S27383B
• Violet
• Black - Paint Code 60775
• Turquoise - Paint Code S27235
• Aztec Orange - Paint code S28054 Three Stage color. Price will include Base color and mid coat.
• Luxury Rich Red - Paint Code S28126 Three Stage color. Price will include Base color and mid coat.
• Racing Orange - Paint Code S28552
• Impact Blue - Paint Code S28685 Three Stage color. Price will include Base color and mid coat.
• Mint Green - Paint Code 1 Three Stage color. Price will include Base color and mid coat.
• Teal - Paint Code S27531 Three Stage color. Price will include Base color and mid coat.
• Viking Purple
• Suede Green - Paint Code S28145
• Classic Light Blue
• States Blue
• Vivid Black - Paint Code A27220B
• Red Three Stage color. Price will include Base color and mid coat.

Colours will dry to a flat finish and will require a 2K Clearcoat.

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying 2K Clearcoat..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats. Leave 60 minutes before applying 2K Clearcoat.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

The G Plus Rotary Polisher has been developed to Farécla’s own specifications to deliver the ideal polishing machine for bodyshops and trade professionals.

Its high torque makes it ideal for 6" and 8" pads - powerful and fast, yet light and well balanced to reduce operator fatigue and exposure to harmful hand arm vibrations (HAVs)

Included in the box is a free G Mop Flexible Back Plate (for 6" pads) allowing for improved handling performance when paired with the G Mop Applicator Range; easily riding swages and contours in complicated areas.

A hard rigid hand sanding block fitted with hook and loop that will accept any brand of 70 x 198mm abrasive sanding strip.

Use this block to flat, sand and prepare vehicle panels, kitchen doors and walls prior to painting and spraying.

Size 70 x 198mm

Description:

Our Pearls are the very best on the planet. Our Pearls exhibit the brightest and most vivid colours. Apply our Pearls over any Base colour to produce a real custom effect.

For best performance use Custom Paints Reducer and Mix 2-1

Pearl Paint Kits:

Pearl Kits Will Include:

• Base White
• Pearl Colour
• D-Thinner
• 2K Clearcoat + Activator

Pearl Colours:

• Blue Pearl
• Gold Pearl
• Green Pearl
• Indigo Pearl
• Orange Pearl
• Magenta Pearl
• Purple Pearl
• Red Pearl
• Silver Pearl
• Solid Copper Pearl
• Solid Rich Gold Pearl
• Turquoise Pearl

Pearl CANZ:

Our award winning Pearls are now available in an aerosol can. Pearl CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or Spray Gun cleaning.

To get the best result from Pearl CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Pearls are easy to apply and can even be applied with an airbrush. Apply Pearls over any colour Basecoat, but Pearl colours can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat.
• Mix Pearl 2-1 with Reducer and stir well.
• Apply 2-4 coats of Pearl depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply 2K Show Clear for a Real Deep Gloss finish.

Description:

Our Pearls are the very best on the planet. Our Pearls exhibit the brightest and most vivid colours. Apply our Pearls over any Base colour to produce a real custom effect.

For best performance use Custom Paints Reducer and Mix 2-1

Pearl Paint Kits:

Pearl Kits Will Include:

• Base White
• Pearl Colour
• D-Thinner
• 2K Clearcoat + Activator

Pearl Colours:

• Blue Pearl
• Gold Pearl
• Green Pearl
• Indigo Pearl
• Orange Pearl
• Magenta Pearl
• Purple Pearl
• Red Pearl
• Silver Pearl
• Solid Copper Pearl
• Solid Rich Gold Pearl
• Turquoise Pearl

Pearl CANZ:

Our award winning Pearls are now available in an aerosol can. Pearl CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or Spray Gun cleaning.

To get the best result from Pearl CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Pearls are easy to apply and can even be applied with an airbrush. Apply Pearls over any colour Basecoat, but Pearl colours can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat.
• Mix Pearl 2-1 with Reducer and stir well.
• Apply 2-4 coats of Pearl depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply 2K Show Clear for a Real Deep Gloss finish.

A technically advanced adhesion promoter that offers excellent adhesion to virtually any substrate. It is fast drying with a very low film build up.

Super Grip has been tested on the following substrates: Most types of plastic, any non ferrous metal including aluminium & stainless steel, glass, porcelain and E coat substrates. 

Ready to use.

Solvent-free epoxy adhesive. Strong, rapid-setting and long-lasting. Can be painted and sanded.

Bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most hard plastics. 

The 24ml cartridge has an inbuilt plunger so no dispensing gun required. Simply snap off the nozzle cap, keep cap to one side, then push down on the plunger 

Features 

• Rapid Setting
• Long Lasting
• Heat, Cold, Water & Oil-Resistant
• Drys Clear

Palm Air Sander 625627

75mm

A super handy for sanding & priming wood, plastics, filler and metals and flatting back between coats.

The perfect SMART repair tool & ideal for wheel repairs.

• Hook and Loop
• 75mm Pads
• Thread – M6
• Inlet – 1/4″
• Air Consumption – 3.5CFM

Description

Use these quality 5% Cobalt 8mm Spot Weld drill bit for drilling out spot welds on most common vehicle panels including galvanized and high stress steels.

5% Cobalt allows re-sharpening.

Length of spot weld drill 79mm

Pack of 10 drills 

Prism Metal Flake:

Custom Paints Metal Flakes are the HIGHEST grade you can buy, there are ultra thin and have outstanding sparkle with a colour change effect when viewed at different angles. Apply our Prism Metal Flakes over any base colour to produce a real custom effect. The Metal Flake can be added to solvent or water based Lacquers, Clear base coats and Resin's.

The Prism Metal Flakes come in 008 Hex or 004 Hex

The Prism Metal Flake Colour Range:

• Prism Metal Flake  Blue - Changes from a Blue to Violet
  

Prism Metal Flake Application:

Apply our Prism Metal Flakes over any base colour to produce a real custom effect but most customers use a black Basecoat. We recommend adding the Prism Metal Flake to our Flake Carrier but you can add them to a Automotive solvent or water based Clearcoats, Clear basecoats and Resin's. Depending on how heavy you want the flake effect, will depend on how much you will need.

Always spray test panels before spraying you product or project to see the effect you desire.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Base coat.
• Add the Prism Metal Flake to a Clear base coat or lacquer and stir well.
• Apply the Prism Metal Flake until you get the effect you desire. 
• Apply a Clearcoat until the Prism Metal Flake is fully covered.

Metal Flake Fx Application: "Paint"

METAL FLAKE FX is an EASY to apply Metal Flake paint. Metal Flake FX is highly concentrated with our Metal Flake and full coverage can be achieved with in a few coats, which then can be 2K clear coated or be used as a base for our Candy effect paints.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying the effect colour to ensure basecoat is fully dry.
• Stir paint well before adding Reducer. Mix Metal Flake Fx 2-1 with Reducer & stir well.
• Apply 2-5 coats of Metal Flake Fx depending on the effect you desire. Leave 20-30 minutes between coats. Ensure its fully 
• Leave 60 minutes before applying a 2k Clearcoat.

Spray Gun Size for Metal Flake:

(SMF) Small Flake is our fine cut flake at .004 x .004 hex. SMF flake size can be sprayed through most large size tip airbrushes, as well as HVLP full and detail sized spray gun equipment with a 1.0 nozzle set-up or larger. SMF lays down much flatter then MMF, LMF and XMF so it's easier to finish with clear.

(MMF) Medium Flake is our medium cut flake at .008 x .008 hex. MMF flake size has a sparkling brilliance that is easy to use. MMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.5 nozzle set-up or larger.

(LMF) Large Flake is our large cut flake at .015 x .015 hex. LMF flake size has double the amount of sparkling brilliance of the LMF and has been used in the custom market for many years. LMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.8 nozzle set-up or larger.

(XMF) Extra Large Flake is our extra large cut flake at .025 x .025 hex. XMF is an extreme size flake gives a extreme amount of sparkle. XMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 2.2 nozzle set-up or larger.

Description:

Chromacoat shifting effect changes colour right before your eyes. Chromacoat finishes are based on the revolutionary ChromaFlair Colour shifting colorants. These are unique colorants that offers previously unattainable colour performance, they actually change colour depending on the angle from which they are viewed. More than just a subtle variation in shade, the colour undergoes an almost magical transformation in appearance. On rounded curved surfaces and sharp angles will highlight the magical appearance of Chromacoat.

For best performance use Custom Paints Reducer and Mix 2-1

Chromacoat Paint Kits:

Chromacoat Kits Will Include:

• Base Black
• Chromacoat Colour
• D-Thinner
• 2K Show Clear & Activator
  

Chromacoat Colours:

• Chromacoat Autumn Spice - Shifts from Copper Orange - Gold - Green
• Chromacoat Blue - Shifts from Blue - Red - Gold
• Chromacoat Copper - Shifts from Copper - Blue - Purple
• Chromacoat Cyan - Shifts from Cyan - Purple - Gold
• Chromacoat Fireball - Shifts from Black - Red - Gold
• Chromacoat Flamingo - Shifts from Purple - Pink - Gold - Green
• Chromacoat Gold - Shifts From Gold - Silver
• Chromacoat Golden Night - Shifts from Gold - Silver - Blue
• Chromacoat Green - Shifts from Green - Blue - Purple - Gold
• Chromacoat Heather - Shifts from Pinky Purple - Blue - Violet
• Chromacoat Key Lime - Shifts from Gold - Green - Blue - Purple
• Chromacoat Peacock - Shifts from Green - Blue - Purple - Green
• Chromacoat Purple - Shifts from Purple - Green - Violet
• Chromacoat Red - Shifts From Red - Gold
• Chromacoat Silver - Shifts from Silver - Green - Purple
• Chromacoat Siren - Shifts from Silver - Green - Blue - Purple
• Chromacoat Smokin Charcoal - Shifts from Dark Purple - Grey - Green - Blue - Violet
  
• Chromacoat Sunrise - Shifts from Gold - Silver - Purple
• Chromacoat Swift Green - Shifts from Green - Blue
• Chromacoat Voodoo - Shifts from Purple - Green

Chromacoat CANZ:

Our award winning Chromacoat is now available in an aerosol can. Chromacoat CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

To get the best result from Chromacoat CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Chromacoat is easy to apply and can even be applied with an airbrush. For best results use a Black Basecoat but using different colours will give you a real custom effect. Chromacoat can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Mix Chromacoat 2-1 with Reducer and stir well.
• Apply 2-5 coats of Chromacoat depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Description:

Base Pearlz have a massive depth of colour and a shimmering iridescence that leaves other Basecoats looking lifeless, dull and boring! Our Base Pearlz have an extreme amount of Pearl luster!

Base Pearlz come in a wide range of colours. They can be simply top coated or used as a basecoat for our Candy, Liquid, Passion or any of our other effect coatings.

For best performance use Custom Paints D-Thinner and Mix 2-1

Base Pearlz Paint Kits:

Base Pearlz Kits Will Include:

• Base Colour
• Base Pearlz Colour
• D-Thinner
• 2K Show Clear & Activator

Base Pearlz Colours:

• Blue Grape (Best used over White Base)
• Blue Ocean (Best used over White Base)
• Bondi Beaches (Best used over Blue Waves Base)
• Champagne Pink (Best used over White Base)
• Coconut (Best used over Black Base)
• Daytona Beaches (Best used over Mint Green Base)
• Fizzy Pink (Best used over White Base)
• Honey (Best used over White Base)
• Hot Salsa (Best used over White Base)
• Key West (Best used over Blue Waves Base)
• Miami Pink (Best used over Pink Base)
• Monza Red (Best used over Red Base)
• Novak Purple   (Best used over White Base) 
• Orange Fusion (Best used over White Base)
• Oriental Blue (Best used over White Base)
• Peachy King (Best used over White Base) 
• Pineapple (Best used over White Base)
• Pink Fantasy (Best used over White Base)
• Purple Lust (Best used over White Base)
• Purple Surfer (Best used over White Base)
• Purple Velvet (Best used over White Base)
• Sky Black (Best used over Black Base)
• Snow White (Best used over White Base)
• Sugar Apple (Best used over White Base)
• Sunburst (Best used over White Base)
• Tobago Bay (Best used over Blue Waves Base)

Base Pearlz CANZ:

Our award winning Base Pearlz are now available in an aerosol can. CANZ give high output with excellent atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or spray gun cleaning.

To get the best result from Base Pearlz CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Base Pearlz coatings are easy to apply and can even be applied with an airbrush. For best results use a White Primer or a White Basecoat.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job (Sand, Prime, etc.) in a White Primer or Basecoat specified.
• Apply 2-3 coats of Basecoat leaving 10 - 15 minutes between coats. Leave 60 minutes before applying effect colour.
• Mix Base Pearlz 2-1 with D-Thinner and stir well.
• Apply 2-4 coats of Base Pearlz depending on the effect you desire, leaving 15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply 2K Show Clear for a real deep gloss finish.

Customers Projects:

Base Pearlz Sugar Apple
     

Ferrari Paint Colours

Custom Paints Ltd can offer a large range of colours for the Ferrari including there hard to find special effects colours.

1000's of other colours available, If the colour you require is not listed please contact us with the colour name and paint code. You can contact us via email and telephone which is listed below:

Email - uk@custompaints.com

Telephone - 0114 275 2187

All colours will come as "Standard" Shade unless stated. Other shades available on request. 

"3 Stage" colours:  Price will include Base colour and mid coat.

Ferrari Car Colours;

322 - Rosso Corsa

611 - Verde British

161170 - Rosso Fuoco

350 - Rosso Dino

910 - Nero Daytona

704 - Grigio Titanio

750 - Grigio Alloy

4305 - Giallo Modena

100 - Bianco Avus

521 - Blu Pozzi

This colour will dry to a flat finish and will require a 2K Clear coat.

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

TVR Paint Colours

Custom Paints Ltd can offer a large range of colours for the TVR.

We can offer the hardest to find TVR paints colours !!  If you unable to find your colour, please call us to with the paint code and the name of the colour.

All colours will come as "Standard" Shade unless stated. Other shades available on request. 

TVR Chameleon colours: Best applied over black base coat 

TVR Reflex colours: Best applied over black base coat 

 TVR Spectraflair colours: (Made to TVR Strengh) Best applied over light gray base coat. 

 TVR Nebula colours: Will Require black or blue base coat  

TVR Cascade colours: (Made to TVR Strength) Best applied over black base coat  

TVR Paint Kits:

TVR Kits Will Include:

• TVR Colour
• D-Thinner
• 2K Show Clear & Activator

This colour will dry to a flat finish and will require a 2K Clear coat.

1000's of other colours available, Please contact us with the name and paint code of the colour you require, if you can not see your colour listed.

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire colour required. Leave 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

TVR Paint Colours

Custom Paints Ltd can offer a large range of colours for the TVR.

We can offer the hardest to find TVR paints colours !!  If you unable to find your colour, please call us to with the paint code and the name of the colour.

All colours will come as "Standard" Shade unless stated. Other shades available on request. 

TVR Chameleon colours: Best applied over black base coat 

TVR Reflex colours: Best applied over black base coat 

 TVR Spectraflair colours: (Made to TVR Strengh) Best applied over light gray base coat. 

 TVR Nebula colours: Will Require black or blue base coat  

TVR Cascade colours: (Made to TVR Strength) Best applied over black base coat  

TVR Paint Kits:

TVR Kits Will Include:

• TVR Colour
• D-Thinner
• 2K Show Clear & Activator

This colour will dry to a flat finish and will require a 2K Clear coat.

1000's of other colours available, Please contact us with the name and paint code of the colour you require, if you can not see your colour listed.

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire colour required. Leave 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

MG Rover Paint Colours

Custom Paints Ltd can offer a large range of colours for the MG Rover including there hard to find special effects colours.

If you unable to find your colour, please call us to with the paint code and the name of the colour.

All colours will come as "Standard" Shade unless stated. Other shades available on request. 

MG Rover "MONOGRAM" effect Colours. (Made to MG Rover Strength) 

This colour will dry to a flat finish and will require a 2K Clear coat.

1000's of other colours available, Please contact us with the name and paint code of the colour you require, if you can not see your colour listed.

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Lamborghini Automotive Colours

All colours will come as "Standard" Shade unless stated. Other shades available on request.

All colours are reduced 1-1 with thinner.

• Verde Ithaca - Paint Code 0077 Three Stage colour. Price will include Base colour and mid coat.
• Gallio Orion - Paint Code 0056 Three Stage colour. Price will include Base colour and mid coat.
• Ballon White - Paint Code 224.009 Three Stage colour. Price will include Base colour and mid coat.
• Arancio Atlas - Paint Code 0058
• Viola Parsifae - Paint Code 0172
• Verde Mantis - Paint Code Z6A
• Arancio Argos Pearl - Paint Code 0117
• Nero Nemesis Pearl - Paint Code 0109
• Blu Glauco - Paint Code 0123
• Grigio Lynx Met - Paint Code Z7S
• Viola Nebula Pearl - Paint Code 0275

This colour will dry to a flat finish and will require a 2K Clear coat.

1000's of other colours available, Please contact us with the name and paint code of the colour you require, if you can not see your colour listed.  

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying 2K Clearcoat..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire colour required. Leave 10-15 minutes between coats. Leave 60 minutes before applying 2K Clearcoat.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Lamborghini Automotive Colours

All colours will come as "Standard" Shade unless stated. Other shades available on request.

All colours are reduced 1-1 with thinner.

• Verde Ithaca - Paint Code 0077 Three Stage colour. Price will include Base colour and mid coat.
• Gallio Orion - Paint Code 0056 Three Stage colour. Price will include Base colour and mid coat.
• Ballon White - Paint Code 224.009 Three Stage colour. Price will include Base colour and mid coat.
• Arancio Atlas - Paint Code 0058
• Viola Parsifae - Paint Code 0172
• Verde Mantis - Paint Code Z6A
• Arancio Argos Pearl - Paint Code 0117
• Nero Nemesis Pearl - Paint Code 0109
• Blu Glauco - Paint Code 0123
• Grigio Lynx Met - Paint Code Z7S
• Viola Nebula Pearl - Paint Code 0275

This colour will dry to a flat finish and will require a 2K Clear coat.

1000's of other colours available, Please contact us with the name and paint code of the colour you require, if you can not see your colour listed.  

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying 2K Clearcoat..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire colour required. Leave 10-15 minutes between coats. Leave 60 minutes before applying 2K Clearcoat.
• Apply our 2K Show Clear for a Real Deep Gloss finish.