Description:

Specially formulated for the professional using the latest technology in lightweight body fillers, it combines excellent filling properties together with the easiest sanding of all the U-POL fillers.

• Multifunction body filler that can be used for deep filling or finishing.
• Excellent spreadability and super easy sanding properties.
• Adheres directly to a variety of substrates including galvanised and some plastics.
• Uses the latest resin technology for a pinhole-free very easy sanding product even after 24 hours.

The two-component multifunctional paste is used for the filling of holes and imperfections in most substrates.

Description:

The Big Smooth Easy One is an easy to use, smooth textured polyester filler for deep repairs.
The non-sag formula is ideal for use on vertical or horizontal repairs and its lightweight formula bonds to multiple substrates including galvanised steel, metal and GRP.
 

• Smooth textured, tack free finish
• Easy spreading and quick to shape
• Non-sagging when used on vertical surfaces
• Sandable after 20 minutes (at 20C)
• Size: 3L
• Hardener included

It has been specially formulated for the professional using the latest technology in lightweight body fillers and it combines excellent filling properties together with the easiest sanding of all the U-POL fillers. High adhesion to a wide range of substrates: steel, aluminium, GRP & wood. Sandable after 20 minutes at 20C, recommended that nothing coarser / lower than P80 is used. Can be over-painted with most paint systems including 2K

Description:

• For use with polyester body fillers, easy sand, fibreglass repair filler and resins.

Size:

• 40g
• 100g

Description:

Polyester, fiberglass body filler with unique filling properties, which allows it to be applied in thick layers for repairs of deep dents and even rust through spots. Leaves smoother surface due to its short fibres.

Description

This high build, fast-drying, multi-substrate primer has excellent adhesion and corrosion protection for all ferrous and non-ferrous metal surfaces such as galvanised steel and aluminium. It is specially formulated to enhance the adhesion and anti-corrosion properties and provide the ultimate long term protective coating system.

• Outstanding adhesion to multiple substrates
• Fast drying time – overcoat wet on wet after 30 mins
• Easy to sand – wet or dry
• Solvent and chemical resistant
• Excellent corrosion and moisture protection

Available in Grey

Description:

An easy to use ultra smooth finishing filler for skimming and fine finishing in thin layers prior to the paint process.

Formerly Top Stop Gold

• High adhesion to multiple substrates
• Ease of application
• Easy to sand

Description

Mipa P118 is a self-levelling 2K polyester lightweight body filler of low viscosity to even dents and irregularities in car repairs.

It is characterized by its very smooth surface without pores which allows skipping the application of fine putty.

Mipa P 118 can be sanded already with high abrasion after a short drying time.

Adhesion to iron, steel, aluminium, galvanised substrates, GRP and wood. No sagging of the filler.

Features and Benefits:

• (Feature) P118 Body Filler - (Benefit) Self levelling polyester filler
• (Feature) Very smooth surface - (Benefit) Skipping application of fine stoppers
• (Feature) Easy application - (Benefit) No sagging after application
• (Feature) Easy sanding - (Benefit) Porous and pin hole free
• (Feature) Quick drying - (Benefit) 15 minutes at 20°C and 5 minutes at 60°C
• (Feature) Large tin size - (Benefit) Available in 3ltrs with hardeners  

Description:

UPOL Extra Fine Formerly known as Top Stop (Extra Fine) Polyester filler 750ML

UPOL Extra Fine Polyester Stopper is a two-component chemical paste. Used for the filling of small holes and imperfections in surfaces prior to being over-painted. Very soft, smooth paste which is easily spread in thin layers to provide the perfect finish for painting and easily sanded wet or dry after a few minutes.

Directions Of Use:

Extra Fine polyester filler can be used on Bare metal e.g. Steel Aluminium and Zinc coated substrates, degrease and abrade with P80 paper.

Original paint surfaces (with the exception of thermoplastic acrylics) degrease and abrade with P180 grit paper.

GRP degrease and abrade with P80 grit paper.
Pot Life: Once mixed, 5 – 6 mins. at 20°c with 2% hardener.

Drying Time:

Can be sanded after 20 mins. at 20°c. Extra Fine polyester filler can be over-painted with most paint systems including 2K.

Over Painting: Ideally a full system is recommended including primer.

Description

1K acrylic primer with high filling power. Ideal for new parts, fast jobs and spot repairs. Can be applied on metal, steel, galvanised steel and aluminium. Easy application and sanding. VOC compliant.

Millaco Comapct AC815

A fast drying, easy to sand 2K primer filler. This primer has excellent filling power and can also be used for spot repairs without the filler sinking or the build up of edges.

5:1 mixing ratio which requires 2k Acrylic Hardener, 2k Universal Thinners. 

This product is used before top coat is applied.

High build, very easy sanding.

Size: 5 Litre + 1 Litre Activator

1.1LTR UPOL SMC BLACK CARBON FIBRE REINFORCED FILLER

High adhesion bonding paste and filling compound

Key Features

• High adhesion bonding paste and filling compound
• Designed to repair cracks, holes and scratches in SMC, fiberglass, composite and other rigid materials
• Reinforced with carbon fibre for structural strength
• Easy to sand to a fine finish

Mipa P12 is a two-component body filler (hardener included) of low viscosity, based on polyester resin and provides a specific weight reduced by approx. 40%. The more liquid nature in combination with special filling material results in a closed, nonporous surface which is easy to sand.

Mipa P12 adheres on steel plates, zinc, aluminium, GRP and wood. It can be easily sanded with high abrasion after a short drying time.

Key Features

Easy to Sand
Polyester Resin-Based
Short Drying Time

Product description

Description

Fill deep dents with 3M™ Heavy General Purpose Filler. Our Heavy General Purpose Filler is a smooth, heavyweight general purpose body filler that works with all mainstream paint systems and can be used for a range of applications and temperatures.

Get a body filler that spreads easily and is easy to sand with 3M™ Heavy General Purpose Filler. Our premium quality, light coloured Heavy General Purpose Filler has good adhesion to steel, galvanised metal and aluminium. 3M™ Heavy General Purpose Filler is ideal for deep dents. It can be applied easily, cures fast, is easy to sand to a smooth surface, and works really well with mainstream paint systems.

PE-High build body filler including hardener.

For both filling and finishing on all metal, alu, zinc and fibre glass substrates.

Colour: Beige

Description

U-Pol Dolphin Medium Filler 3L

PE-High build body filler including hardener.

For both filling and finishing on all metal, alu, zinc and fibre glass substrates.

Colour: Beige

MIPA HS F37

2K WET ON WET FILLER PRIMER 3L

Light Grey

Mipa 2K-HS-NiN-Füller F 37 is a high-quality wet-on-wet filler that offers excellent features for efficient coatings. 

Intact, sound e-coatings can be overcoated with F 37 without any pre-sanding.

Its fast re-coatability and universal adhesion, even on plastic, are further advantages of the new wet-on-wet filler.

• excellent spray mist absorption
• re-coatable after 15 min
• no sagging

Mixing ratio: 5:1    Hardener: H10, MS 10

Hardener included

Description for 4+1 Primer

Mipa 4+1 Acrylfiller HS has very good filling properties and is very easy to sand. This filler can be used as compact as well as high-build filler.

The combination with Mipa 2K-Reaktivzusatz VR allows a very quick processing followed by heat-drying or drying at room temperature.

This offers saving potentials in terms of spray booth occupancy, stoving times as well as working time. It is also suitable to fill partial areas (Spot repair) without sinkage or visible marks in the outer rim.

Another application option when using Mipa 2K Reaktivzusatz VR is the wet-on-wet application, after which the surface can be overcoated after only a very short intermediate drying of only 10 minutes at room temperature.

Spreading rate: 5,0 - 6,0 m²/l (for 50 - 80 µm DFT)

Description for H5 Hardener

Mipa 2K H5 extra fast acrylic hardener, specially developed to be used in conjunction with Mipa 2K primers.

Mixing ratio 4:1 by volume

Description

Mipa Porenwischfiller
1K-wipe filler can be used to fill
micropores especially for plastic parts.

Monofil Lightweight filler is a fast drying body filler and putty adheres to steel plates, zinc metal, aluminium and glass reinforced plastic. 

Due to its paste-like viscosity the Monofil Lightweight Filler enables a non-porous application and results in a smooth and sealed surface. Furthermore, it dries quickly and is easy to sand.

3 Litres + Hardener

Description