Clearcoat: U-pol Maximum HS Fast Hardener 2.5lt

£25.00 (excl. VAT)

Choose a Colour

For professional use only, this U-POL Maximum Hardener is intended to be used with U-POL's Maximum 2:1 HS Clear Coat, requiring a mix of two parts clear coat to one part hardener. This product contains isocyanates and comes in a 2.5-litre tin.

Features & Benefits

Specifically formulated for use with U-POL's Maximum 2:1 HS Clear Coat
Contains isocyanates for enhanced durability
2.5-litre tin
For professional use

Clearcoat: U-pol Maximum HS Fast Hardener 2.5lt

Clearcoat: U-pol Maximum HS Standard Hardener 2.5lt

£25.00 (excl. VAT)

Choose a Colour

For professional use only, this U-POL Maximum Hardener is intended to be used with U-POL's Maximum 2:1 HS Clear Coat, requiring a mix of two parts clear coat to one part hardener. This product contains isocyanates and comes in a 2.5-litre tin.

Features & Benefits

Specifically formulated for use with U-POL's Maximum 2:1 HS Clear Coat
Contains isocyanates for enhanced durability
2.5-litre tin
For professional use

Clearcoat: U-pol Maximum HS Standard Hardener 2.5lt

Clearcoat: ProXL Xpress305 – AD Smart Repair Clear Coat

£23.33 (excl. VAT)

Choose a Colour

It is probably the world’s quickest air-drying Clear coat that combines excellent flow out and gloss retention with ease of blending out and polishing if required.

This clear coat is one of the best products for all SMART repair applications and environments :

Ultra Fast drying performance – 30 minutes at 20oc
Ease of application,
Water-clear finish when cured
Excellent gloss retention – 90% gloss retention after 2,000 hrs of testing

Clearcoat: ProXL Xpress305 – AD Smart Repair Clear Coat

Clearcoat: Mipa CS21 Clear 5 Litre Kit

£62.50 (excl. VAT)

Choose a Colour

MIPA CS21 is a 2K (two-component) High Solid (HS) acrylic clearcoat that, when mixed with MIPA SR10 Fast Hardener at a 2:1 ratio (Clearcoat:Hardener), provides a durable, scratch-resistant, high-gloss finish for automotive, motorcycle, and commercial vehicle repairs, working well over waterborne or solvent basecoats and offering fast drying times, even with minimal thinning.

Key Features

Type: 2K HS Acrylic Clearcoat (Klarlack).
Technology: Uses Reflow Technology, applied without thinner.
Resistance: Excellent resistance to micro-scratches (from car washes) and chemicals.
Application: Easy to apply, suitable for full or partial repaints, and works over waterborne or solvent basecoats.
Finish: High gloss level.
Drying: Fast drying, especially with the SR10 hardener.

Mixing & Application (General Guidelines)

Ratio: 2 parts CS21 Clearcoat to 1 part SR10 Hardener (2:1).
Application: Apply a 3/4 coat, allow 1-3 mins flash-off, then apply one full coat.
Flash-off (after basecoat): 10 minutes.
Drying: Air dry at 20°C (68°F) for 24 hours, or bake at 60°C (140°F) for 30 mins.

Kit Details

7.5 litres (5L CS21 + 2.5L SR5)

Clearcoat: Final Systems Advantage Clear 5 Litre Kit

£66.67 (excl. VAT)

Choose a Colour

Advantage+ 2K MS Clearcoat is an acrylic clearcoat with medium solids content.

Advantage+ 2K MS Clearcoat can be used over solvent basecoats. It is easy to apply, fast drying and has a good gloss level.

Key Features:

Easy to apply
Good gloss level
Fast drying
Mixing ratio 2:1

Clearcoat: Final Systems Advantage Clear 5 Litre Kit

Clearcoat: Mipa CC9 Clear 5 Litre Kit

£150.00 £110.00 (excl. VAT) Save £40.00

Choose a Colour

Product description

The Mipa 2K HS Klarlack CC9 Clear Coat Kit with HS25 Hardener (7.5L) is a high-solid acrylic clearcoat for cars/commercial vehicles, offering VOC compliance, excellent gloss, and flow over water or solvent basecoats, curing well at room temp or oven, featuring a 2:1 mixing ratio (clear:hardener) and a long pot life for consistent application. The kit typically contains 5L of CC9 Clearcoat and 2.5L of HS25 Standard Hardener, ideal for complete paint jobs, providing durability and a premium finish.

Key Features

Type: High-Solid (HS) Acrylic 2K Clearcoat.
Application: Full & partial resprays on cars & commercial vehicles.
Basecoats: Works perfectly over both water-borne and solvent-borne basecoats.
Finish: Brilliant gloss and optimal flow.
Curing: Fast surface drying, full hardness by oven or air drying (room temp).
VOC Compliant: Meets environmental regulations.

Kit Contents (7.5L)

Mipa CC9 Clearcoat: 5 Litres.
Mipa HS25 Hardener: 2.5 Litres (Standard Speed).

Mixing & Application

Mixing Ratio: 2 parts Clearcoat to 1 part Hardener (by volume).
Pot Life: Long (around 1 hour with HS25), allowing for consistent spray viscosity.
Drying Times (with HS25 Hardener):

At 20°C (Room Temp): ~6 hours.
At 60°C (Oven): 40-50 minutes.

Benefits

Superior Flow: Its slow viscosity build-up ensures a defect-free flow.
Durability: Provides a long-lasting, professional finish, enhancing vehicle appearance and protection

Clearcoat: Max Meyer 0200 HS Clear Coat Including Hardener (7.5L Kit)

£70.83 (excl. VAT)

Choose a Colour

MaxMeyer 0200 HS New is a 2K high solid clear.

Which displays excellent flowing capabilities, quick drying and polishing, hardness and gloss.
It is used for spot, panel and overall repairs.

Can be used in conjunction with 4000, 6000, 8000 & 9000 Max Meyer 2K Hardeners and 4305, 4310 & 4320 Max Meyer 2K Thinners.

Include in sale:

5 Litres Clear coat

2.5 Litres Hardener

Mixing Ratio 2:1:0-10%

Clearcoat: Max Meyer 0200 HS Clear Coat Including Hardener (7.5L Kit)

Clearcoat: Mipa C10 1K Clear 1 Litre

£12.50 (excl. VAT)

Choose a Colour

Mipa C10 1K Clearcoat (Klarlack) RFU is a crystal-clear, ready-to-use acrylic lacquer for high-gloss, durable finishes, offering 2K-like quality in a single pack, ideal for smart repairs and spot jobs with excellent UV protection and gloss retention, compatible with most paints but not recommended for water-based systems. It provides good weathering and temporary petroleum resistance and cures to a hard finish, requiring 2-3 coats with flash-off time between applications.

Key Features & Benefits:

Ready for Use (RFU): No mixing with hardener needed, offering convenience.
High Gloss & Depth: Delivers excellent gloss and image depth for a professional finish.
UV Resistant: Protects against UV light, maintaining colour stability.
Durable: Forms a tough, long-lasting coating.
Good Chemical Resistance: Resists temporary exposure to petroleum.
Versatile: Suitable for spot repairs, complete resprays, and overcoating other paint systems (except water-based).

Application & Drying (at 20°C):

Application: 2-3 coats, with 5-10 mins flash-off between coats.
Dust Dry: 30-40 mins.
Set to Touch: 4 hours.
Full Hardness: 24 hours.
Re-coatable: Within 2 hours, or after 48 hours for full recoat (check TDS).

Important Considerations:

Water-Based Paints: Avoid using over water-borne basecoats.
Storage: Store in original, tightly closed containers between +5°C and +25°C, away from sunlight

Clearcoat: 2K MS Crystal Clear Coat Antiscratch Kit

£18.33 (excl. VAT)

Choose a Colour

2K MS Crystal Clear is a top quality, 2 Pack acrylic clear coat, suitable for air-drying or baking, which gives a brilliant and durable gloss to various types of basecoat.

It has excellent application properties, is quick drying, has good chemical resistance and is easy to polish.

It may be used where small areas or complete vehicles are to be painted.

This 2 pack clear lacquer is the ideal product for the fast throughput body shop.

Should you need to remove dust from the finish we have also tested the ease of removing imperfections and polishing with a number of systems from Farecla G3 and 3M Fast Cut with fast and easy to achieve results.

Mixing Ratio is 2 parts Clear to 1 part Activator (2:1) with up to 10% Thinner if required.

Clearcoat: 2K MS Crystal Clear Coat Antiscratch Kit

Clearcoat: ProXL Xpress405 Express Clear 5 Litre Kit

£95.83 (excl. VAT)

Choose a Colour

ProXL Xpress 405 – HS Anti-Scratch Rapid Clearcoat Kit 7.5L

Key benefits of using XPRESS405 HS Anti Scratch Clear Coat Lacquer

Increased throughput with decreased costs
High Solids content >40% allows single coat, deep-finishes
Ease of application
Premium finish

Clearcoat: ProXL Xpress405 Express Clear 5 Litre Kit

Clearcoat: Mipa 2K HS Carbonic Clear 1L

£29.17 (excl. VAT)

Choose a Colour

The Mipa 2K HS Carbonic Klarlack is a high-quality, fast-drying 2-component clearcoat designed for carbon fiber & composites, offering excellent UV protection & chemical resistance, with a 2:1 mix ratio to a compatible Mipa hardener, ensuring a durable, non-yellowing, high-gloss finish for automotive & custom projects, ready for sanding/polishing quickly after curing.

Key Features & Benefits:

· High-Quality Finish: Provides a brilliant gloss with excellent flow and durability.

· Carbon Fiber Optimized: Specifically designed for carbon fiber and composite materials, resisting yellowing and weathering.

· Fast Drying: Offers quick drying times (e.g., sandable in 1-2 hrs at 40°C/104°F) for efficient workflows.

· UV Protection: High UV resistance prevents discoloration, ideal for exposed surfaces.

· Versatile: Works over solvent-borne basecoats and can be used with Mipa fillers like P 67 S for imperfections.

How It Works (General 2K Process):

1. Mix: Combine the clearcoat (Klarlack) with the Mipa HS25 Hardener (activator) at the recommended ratio (typically 2:1).

2. Apply: Spray onto a properly prepared surface (basecoat, filler).

3. Flash-Off: Allow brief drying between coats.

4. Cure: Air dry at room temp (longer) or bake (faster).

5. Finish: Can be sanded and polished after sufficient curing for a mirror finish.

Clearcoat: Final Systems Advantage Clear 1 Litre Kit

£20.00 (excl. VAT)

Choose a Colour

Advantage+ 2K MS Clearcoat is an acrylic clearcoat with medium solids content.

Advantage+ 2K MS Clearcoat can be used over solvent basecoats. It is easy to apply, fast drying and has a good gloss level.

Key Features:

Easy to apply
Good gloss level
Fast drying
Mixing ratio 2:1

Clearcoat: Final Systems Advantage Clear 1 Litre Kit

Clearcoat: ProXL Gen20 Clear 5 Litre Kit w/ Fast Activator

£62.50 (excl. VAT)

Choose a Colour

The ProXL Gen20 High Solids Clearcoat 7.5L Fast Kit is a premium 2K automotive clearcoat designed for fast drying, excellent flow, and a durable, high-gloss finish, even in just two coats, ideal for body shops needing quick turnaround, featuring rapid curing technology and UV resistance for both small and large jobs. This kit typically contains 5 litres of clearcoat and 2.5 litres of fast universal hardener.

Key Features & Benefits:

High Solids (HS): Offers excellent coverage and depth.
Fast Drying: Rapid curing, with options like Xpress405 allowing for quick booth baking (e.g., 5 mins @ 50°C).
Superior Finish: Delivers a crystal-clear, high-gloss, and durable finish with great flow and leveling, reducing polishing time.
UV Resistant: Protects against environmental damage.
Versatile: Suitable for all sizes of repairs, from smart repairs to large panel coating.
Kit Contents: Usually 5L Clearcoat + 2.5L Fast Hardener (7.5L total)

Clearcoat: ProXL Gen20 Clear 5 Litre Kit w/ Fast Activator

Clearcoat: Pro-Spray PSC-7000 Clearcoat

£69.99 (excl. VAT)

Choose a Colour

PSC-7000 Universal Clear is a versatile, high gloss, high build, two-component, acrylic clear coat. It gives you a superior combination of gloss and levelling with high productivity.

PSC-7000 Universal Clear is a high quality clear coat for overall, spot and panel finishing. This clear coat was developed for exceptional application qualities in a variety of environments and resists shrinkage and fading.

PSC-7000 Universal Clear can be forced or air - dried.

The advanced UV filters and absorbers ensure that this high gloss finish keeps its beauty longer.

Mixing ratio:

3 : 1 with hardeners ICA-802, ICA-801 + 0-10% thinner

Clearcoat: Pro-Spray ICC-8000 Clearcoat

£69.99 (excl. VAT)

Choose a Colour

Pro spray Clear Coat ICC-8000 H.S. Multi Clear allows application in one or two layers.

Intended for repairs of individual elements as well as comprehensive repairs. It is resistant to shrinkage and retains its gloss after drying in a spray booth or in the air.

This clear coat has been developed for exceptional application properties in a variety of conditions.

Mixing ratio:

2 : 1 with hardeners ICA-802, ICA-801 + 0-10% thinner