Description:

Green masking tape is water-resistant and can sit in an 80°C oven for up to one hour.  It has excellent adhesion with easy application to curved profiles and irregular surfaces. It’s easy to remove, leaving no residue. The adhesion is made up of natural rubber and hydrocarbon resins and the backing saturated water-resistant crepe paper.

• Premium water resist paper

• Excellent adhesion to most surfaces

• Easy application on curved profiles and irregular surfaces

• Easy removal

Sizes:

• 24mm
• 38mm
• 48mm

Box:

• 24mm x 45m - 36 rolls
• 38mm x 45m - 24 rolls
• 48mm x 45m - 20 rolls

Mipa P12 is a two-component body filler (hardener included) of low viscosity, based on polyester resin and provides a specific weight reduced by approx. 40%. The more liquid nature in combination with special filling material results in a closed, nonporous surface which is easy to sand.

Mipa P12 adheres on steel plates, zinc, aluminium, GRP and wood. It can be easily sanded with high abrasion after a short drying time.

Key Features

Easy to Sand
Polyester Resin-Based
Short Drying Time

Description

Mirka Goldflex Soft

One of the best foam backed abrasives on the market, Manufactured using a flexible c-weight latex paper, Goldflex is ideal for sanding most timbers and for fine finishing operations on paints and lacquers. The foam backing is easy to grip and assists in application of uniform pressure. The special stearate coating prevents clogging and means this product can be used wet or dry.

Foam Discs made by STARCKE Germany are multi-functional sanding foam material developed for tackling both smooth and contoured profile surfaces and edges.

The flexible weave construction laminated to ultra-breathable flexible foam allows it to create a smooth sanding while minimizing the risk of pressure marks.  This foam "cushions" the abrasive grains facilitating a high quality, even, fine finish.  The weave of the foam allows water and air to pass freely.  Pads are suitable for both wet or dry sanding applications.  Pads can be used by hand or machine.

FEATURES:

• Flexible Foam can be used for both smooth and contoured profile surfaces and edges.
• Anti-clogging features reduce the temperature of the work surface to grant a longer life and enhanced finish quality.
• Specifically designed for automotive paint applications, but also proven effective on nonferrous metals, steel, fiberglass, solid surface, plastic and hardwoods.
• Can be used wet or dry.

Description

U-Pol Dolphin Medium Filler 3L

MIPA HS F37

2K WET ON WET FILLER PRIMER 3L

Light Grey

Mipa 2K-HS-NiN-Füller F 37 is a high-quality wet-on-wet filler that offers excellent features for efficient coatings. 

Intact, sound e-coatings can be overcoated with F 37 without any pre-sanding.

Its fast re-coatability and universal adhesion, even on plastic, are further advantages of the new wet-on-wet filler.

• excellent spray mist absorption
• re-coatable after 15 min
• no sagging

Mixing ratio: 5:1    Hardener: H10, MS 10

Hardener included

Monofil Lightweight filler is a fast drying body filler and putty adheres to steel plates, zinc metal, aluminium and glass reinforced plastic. 

Due to its paste-like viscosity the Monofil Lightweight Filler enables a non-porous application and results in a smooth and sealed surface. Furthermore, it dries quickly and is easy to sand.

3 Litres + Hardener

Mipa 2K-HS-Klarlack matt CCM with a gloss between 15 - 20 degrees at a 60°-angle is a VOC-conform High-Solid acrylic clearcoat to create high-quality matt coatings (partial or complete paintwork) on cars. It is also appropriate to adjust the gloss of Mipa 2K-HS-Klarlacke (clearcoats) and of Mipa 2K-HS-.Express-Klarlack CX 2.

It assures uniformly matted clear coatings on solvent-based and water-based basecoats. Mipa 2K-HS-Klarlack matt CCM provides high resistance to all kind of weathering as well as to chemical and mechanical stresses.

80°C Premium Masking Tape is a general all-round crepe tape for masking off areas when spraying. It is ideally suited to use with other JTAPE products in the body-shop, with a strong adhesion and is heat-resistant to temperatures of 80°C/176°F.

Premium Masking Tape can be easily removed, leaving no residue.

• Superior 5 mil thickness at a previously unachievable price point
• Provide extra comfort and flexibility
• Beaded cuff for ease of donning
• Micro-textured for improved grip
• Ambidextrous allowing easy movement on both hands
• Provide excellent protection from blood-borne diseases making them ideal for medical use, but can be used across a wide range of industries
• Chemical resistant to EN374-2 and EN374-3
• Conform to EN1186 - approved for food contact
• Latex and powder free
• AQL 1.5 medical grade
• Typical applications: automotive, care, tattoo, food handling, laboratory and hairdressing industries

Description