Alien Glow is a glow in the dark paint. This is clearly the best glow in the dark product available with outstanding after glow of up to 24 hours. For best effects, apply Alien Glow over a White Base.

For best performance use Custom Paints D-Thinner and mix 2:1

Alien Glow Colours:

• Blue - up to 24 hours Glow Time
• Green - up to 24 hours Glow Time

Alien Glow CANZ:

Our award winning Alien Glow is now available in 150ml & 400ml aerosol cans. The Kustom canz range gives high output with excellent atomisation and high transfer efficiency with no pressure drop during application. Using our Kustom Canz range can save on time and labour without the requirement of expensive spraying equipment.

To get the best result from Alien Glow CANZ we recommend using White Base as a ground coat and finishing with our market leading Custom Canz 2K Clearcoat.

Available in our Alien Glow Paint Kits: 

All Paint Kits in our drop down section will include:

• Basecoat (White)
• Alien Glow (Any Colour)
• D-Thinner
• 2K Show Clear (includes Activator)

Application:

Alien Glow is easy to apply and can even be applied with an airbrush.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of White Basecoat.
• Stir paint well before adding D-Thinner. Mix Alien Glow 2:1 with D-Thinner and stir well.
• Apply 3-6 coats of Alien Glow. The more coats applied, will give a stronger glow. Leave 10-15 minutes between coats.
• Stir paint between coats as settling may occur. Spray immediately after mixing.
• Apply 2K Show Clear for a real deep gloss finish.

Description:

High Performance 1 component finishes. All colours are intermixable to create thousands of base colours.

Base Colours can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

For best performance use Custom Paints D-Thinner and Mix 2:1

Base Colours:

• Black Base 
• Blue Lagoon Base
• Blue Waves Base 
• Brown Base 
• Clearwater Base
• Cotton Candy Base
• Dark Blue Base 
• Dark Red Base
• Flesh Tone Base
• Fruit Punch Base
• Green Base  
• Lemon Base 
• Lemmon Drop Base
• Light Blue Base 
• Light Green Base 
• Light Grey Base 
• Light Purple Base 
• Lilac Base
• Mint Green Base 
• Mustard Base 
• Orange Base
• Peppermint Base 
• Pink Base 
• Red Base 
• Red Ochre Base
• Robin's Blue Base
• Sky Blue Base 
• Slime Green Base
• White Base 
• Yellow Ochre Base

Base CANZ:

Our Base Colours are now available in an aerosol can. CANZ give high output with excellent atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or spray gun cleaning.

To get the best result from Base CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Base Colours are easy to apply and can even be applied with an airbrush.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix Basecoat 2-1 with D-Thinner and stir well.
• Apply 2-3 coats, leave 10-15 minutes between coats. 
• Apply effect colour or 2K Show Clear for a Real Deep Gloss finish.

Description:

Base Metallics have exceptionally high coverage, are easy to spray and possess high vertical stability with good flow characteristics. They can be simply top coated or used as a Basecoat for our Candy, Liquid, Passion or any of our other effect coatings.

For best performance use Custom Paints D-Thinner and Mix 2-1 

Base Metallic Colours:

• Base Metallic Ash Black
• Base Metallic Black
• Base Metallic Blue
• Base Metallic Coral Red
• Base Metallic Dark Gold (Coarse)
• Base Metallic Day Dreamer Blue
• Base Metallic Dipsy Blue
• Base Metallic Evergreen
• Base Metallic Gold
• Base Metallic Green
• Base Metallic Grey
• Base Metallic Ice Blue
  
• Base Metallic Kiwi Lightning
• Base Metallic Limoncello
• Base Metallic Mandarin
• Base Metallic Mocha
• Base Metallic Mystic Purple
• Base Metallic Pink
• Base Metallic Purple
• Base Metallic Red
  
• Base Metallic Rose Gold
• Base Metallic Sahara Sand
  
• Base Metallic Silver (Fine)
• Base Metallic Silver (Medium)
• Base Metallic Silver (Coarse)
• Base Metallic Sweet Pea
• Base Metallic Turquoise
• Base Metallic Venetian Red
• Base Metallic Wishful Pinkin'

Base Metallic CANZ:

Base Metallic CANZ give high output with excellent atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or spray gun cleaning.

To get the best result from Base Metallics we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Base Metallics are easy to apply and can even be applied with an airbrush. Base Metallic colours can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.) We suggest a Light Grey or White Primer.
• Mix Base Metallic 2-1 with D-Thinner and stir well.
• Apply 2-3 coats, leave 10-15 minutes between coats. 
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Description:

Base Pearlz have a massive depth of colour and a shimmering iridescence that leaves other Basecoats looking lifeless, dull and boring! Our Base Pearlz have an extreme amount of Pearl luster!

Base Pearlz come in a wide range of colours. They can be simply top coated or used as a basecoat for our Candy, Liquid, Passion or any of our other effect coatings.

For best performance use Custom Paints D-Thinner and Mix 2-1

Base Pearlz Colours:

• Blue Grape (Best used over White Base)
• Blue Ocean (Best used over White Base)
• Bondi Beaches (Best used over Blue Waves Base)
• Champagne Pink (Best used over White Base)
• Coconut (Best used over Black Base)
• Daytona Beaches (Best used over Mint Green Base)
• Fizzy Pink (Best used over White Base)
• Honey (Best used over White Base)
• Hot Salsa (Best used over White Base)
• Key West (Best used over Blue Waves Base)
• Miami Pink (Best used over Pink Base)
• Novak Purple   (Best used over White Base) 
• Orange Fusion (Best used over White Base)
• Oriental Blue (Best used over White Base)
• Peachy King (Best used over White Base) 
• Pineapple (Best used over White Base)
• Pink Fantasy (Best used over White Base)
• Purple Lust (Best used over White Base)
• Purple Surfer (Best used over White Base)
• Purple Velvet (Best used over White Base)
• Sky Black (Best used over Black Base)
• Snow White (Best used over White Base)
• Sugar Apple (Best used over White Base)
• Sunburst (Best used over White Base)
• Tobago Bay (Best used over Blue Waves Base)

Base Pearlz CANZ:

Our award winning Base Pearlz are now available in an aerosol can. CANZ give high output with excellent atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or spray gun cleaning.

To get the best result from Base Pearlz CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Base Pearlz Paint Kits:

Base Pearlz 1 Litre Kit: Amazing Value!!!

• 1 Litre of Base Pearlz (Any Colour)
• 1 Litre of Base Colour Specified
• 1 Litre of D-Thinner
• 1 Litre of 2K Show Clear (includes Activator)

Base Pearlz 3 Litre Kit: Amazing Value!!!

• 3 Litres of Base Pearlz (Any Colour)
• 3 Litres of Base Colour Specified
• 3 Litres of D-Thinner
• 3 Litres of 2K Show Clear (includes Activator)

Application:

Base Pearlz coatings are easy to apply and can even be applied with an airbrush. For best results use a White Primer or a White Basecoat.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job (Sand, Prime, etc.) in a White Primer or Basecoat specified.
• Apply 2-3 coats of Basecoat leaving 10 - 15 minutes between coats. Leave 60 minutes before applying effect colour.
• Mix Base Pearlz 2-1 with D-Thinner and stir well.
• Apply 2-4 coats of Base Pearlz depending on the effect you desire, leaving 15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply 2K Show Clear for a real deep gloss finish.

VIDEO

Customers Projects:

Description:

Candy brings you the ultimate custom effect. For best results we recommend using our Base Metallic Silver Coarse but as Candy colours are completely transparent, they  can be applied over any base colour/effect to create your own unique finish.

Candy colours can be faded into each other and also intermixed to create your very own custom colour.

For best performance use Custom Paints D-Thinner to mix 2:1

Candy Colours:

• Black Candy
• Blue Candy
• Blueberry Candy
• Brown Candy
• Cherry Red Candy
• Deep Red Candy
• Emerald Candy
• Fools Gold Candy
• Gold Candy
• Green Candy
• Moss Green Candy
• Ocean Candy
• Orange Candy
• Red Candy
• Ruby Red Candy
• Sugar Plum Candy
• Teal Candy
• Yellow Candy

MTVs PIMP MY RIDE UK:

Custom Paints has teamed up with MTVs PIMP MY RIDE UK for series 3. PIMP MY RIDE UK used our Candy Red on the Daimler XJ6. Our Silver and Black Base were used, fading Silver at the front to Black at the back. Candy Red was then applied over the top.

CANDY CANZ:

Custom Paints award winning Candy is also available in aerosol cans. The Kustom canz range gives high output with excellent atomisation and high transfer efficiency with no pressure drop during application. Using our Kustom Canz range can save on time and labour without the requirement of expensive spraying equipment.

To get the best result from Kustom Canz Candy,  we recommend using our Base Metallic Silver Coarse as a ground coat and finishing with our market leading Custom Canz 2K Clearcoat.

Candy Paint Kits:

Candy 1 Litre Kit: Amazing Value!!!

• 1 Litre of Base Metallic Silver Coarse
• 1 Litre of Candy
• 1 Litre of D-Thinner
• 1 Litre of 2K Show Clear (includes Activator)

Candy 3 Litre Kit: Amazing Value!!!

• 3 Litres of Base Metallic Silver Coarse
• 3 Litres of Candy 
• 3 Litres of D-Thinner
• 3 Litres of 2K Show Clear (includes Activator)

Application:

For best results use Base Metallic Silver Coarse but using different coloured basecoats will give you different effects. Candy Colours can also be used with our other products such as:  Shimmer, Pearl, Spectracoat, Sparkle Pearl, Flip Paint etc.

Always spray test panels before spraying your product or project.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of base coat leaving 10-15 minutes between coats. 
• Allow 1 hour (maximum 24 hours)  before continuing to the next stage.
• Mix Candy 2:1 with D-Thinner and stir well.
• Apply 3-5 coats of Candy depending on the effect you desire, leaving 15 minutes between coats. The more coats you apply, the more deeper and richer the colour will become.  
• Allow 1 hour (maximum 24 hours)  before continuing to the next stage.
• Apply 2K Show Clear for a real deep gloss finish.

Description:

Candy Intensifier (concentrate) is used to strengthen any of our Candy range to produce a deeper and richer effect.

Adding Candy Intensifier to our range of Candy paints allows you to create deeper colours in fewer coats.

Candy Intensifier is an additive and not designed to be used as a coating on its own.

Candy Intensifier (Concentrate) Colours:

• Black Candy
• Blue Candy
• Blueberry Candy
• Brown Candy
• Cherry Red Candy
• Deep Red Candy
• Fools Gold Candy
• Gold Candy
• Green Candy
• Emerald Candy
• Moss Green Candy
• Ocean Candy
• Orange Candy
• Red Candy
• Ruby Red Candy
• Sugar Plum Candy
• Teal Candy
• Yellow Candy

MTVs PIMP MY RIDE UK:

Custom Paints has teamed up with MTV's PIMP MY RIDE UK for series 3. PIMP MY RIDE UK used our Candy Red on the Daimler XJ6. Our Silver and Black Base were used, fading Silver at the front to Black at the back. Candy Red was then applied over the top.

Description:

Chromacoat shifting effect changes colour right before your eyes. Chromacoat finishes are based on the revolutionary ChromaFlair Colour shifting colorants. These are unique colorants that offers previously unattainable colour performance, they actually change colour depending on the angle from which they are viewed. More than just a subtle variation in shade, the colour undergoes an almost magical transformation in appearance. On rounded curved surfaces and sharp angles will highlight the magical appearance of Chromacoat.

For best performance use Custom Paints Reducer and Mix 2-1

Chromacoat Colours:

• Chromacoat Autumn Spice - Shifts from Copper Orange - Gold - Green
• Chromacoat Blue - Shifts from Blue - Red - Gold
• Chromacoat Copper - Shifts from Copper - Blue - Purple
• Chromacoat Cyan - Shifts from Cyan - Purple - Gold
• Chromacoat Fireball - Shifts from Black - Red - Gold
• Chromacoat Flamingo - Shifts from Purple - Pink - Gold - Green
• Chromacoat Gold - Shifts From Gold - Silver
• Chromacoat Golden Night - Shifts from Gold - Silver - Blue
• Chromacoat Green - Shifts from Green - Blue - Purple - Gold
• Chromacoat Heather - Shifts from Pinky Purple - Blue - Violet
• Chromacoat Key Lime - Shifts from Gold - Green - Blue - Purple
• Chromacoat Peacock - Shifts from Green - Blue - Purple - Green
• Chromacoat Purple - Shifts from Purple - Green - Violet
• Chromacoat Red - Shifts From Red - Gold
• Chromacoat Silver - Shifts from Silver - Green - Purple
• Chromcoat Siren - Shifts from Silver - Green - Blue - Purple
• Chromacoat Smokin Charcoal - Shifts from Dark Purple - Grey - Green - Blue - Violet
  
• Chromacoat Sunrise - Shifts from Gold - Silver - Purple
• Chromacoat Swift Green - Shifts from Green - Blue
• Chromacoat Voodoo - Shifts from Purple - Green

Chromacoat CANZ:

Our award winning Chromacoat is now available in an aerosol can. Chromacoat CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

To get the best result from Chromacoat CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Chromacoat Paint Kits:

Chromacoat 1 Litre Kit: Amazing Value!!!

• 1 Litre of Black Basecoat
• 1 Litre of Chromacoat (Any Colour)
• 1 Litre of D-Thinner
• 1 Litre of 2K Show Clear (includes Activator)

Chromacoat 3 Litre Kit: Amazing Value!!!

• 3 Litres of Black Basecoat
• 3 Litres of Chromacoat (Any Colour)
• 3 Litres of D-Thinner
• 3 Litres of 2K Show Clear (includes Activator)

Application:

Chromacoat is easy to apply and can even be applied with an airbrush. For best results use a Black Basecoat but using different colours will give you a real custom effect. Chromacoat can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Mix Chromacoat 2-1 with Reducer and stir well.
• Apply 2-5 coats of Chromacoat depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Description:

Deception Chrome Coating can give you an outstanding Chrome/Mirror effect with up to 98% reflectivity of real chrome plating. Deception Chrome is a the most reflective coating available and is easy to apply without any special equipment. It can be applied with any high quality paint gun and dries instantly into a brilliant, mirror-like finish.

Deception Chrome can be applied with almost any type of spray equipment from airbrushes to full size HVLP guns. Deception Chrome goes a long way, it is sprayed at 20-40 psi with 10-15% volume exiting the spray gun. Just mist it over the surface until you have a even disposition. To achieve the highest mirror-like reflectivity, lies in the surface preparation of the object you are painting. The smoother, more "glass-like" your surface is, the more reflective the final appearance will be.

Application:

• 1st Step if you've never sprayed this product is to do test samples, or call our help line and get guidance to apply this product correctly, as this will not be sprayed the same as a regular base coat paint.
• Apply a Black Basecoat.
• Allow the Basecoat to fully dry 45 minutes and now you are ready to apply the topcoat 2K Show Clear. (If your surface already has a glass like finish, move to Step 4.)
• Apply 2 coats of 2K Show Clear and allow to dry. NOTE: We Recommend you to wait 36 Hours for all of the tail solvents to evaporate before you can proceed to Step 4. You can now sand and buff if necessary to remove any surface imperfections, you will need to be sure to remove all compounds and wax residues with rubbing alcohol to insure a streak-free surface prior to applying the Chrome.
• Begin applying 2-4 coats of Chrome using a dusting effect, a very small volume of material with a substantial amount of air. If you are using an HVLP gun you should be around 20 psi, otherwise use whatever the recommended air pressure is for your gun, remembering to keep the material volume very low.
• Between Coats use a very soft lint-free cloth and carefully remove all of the excess "dust" from the surface every time, when you complete this step you will notice an improvement in the appearance. When you have finished applying our Chrome coating use a very soft clean lint-free cloth, soak the cloth with clean warm water and carefully wash the object to remove all of the excess "dust" from the surface. Once you complete this step you will notice an improvement in the final appearance.
• Allow the Chrome to (Air dry 30 minutes or Bake 140 F for 15 minutes). Be sure all moisture is removed prior to moving on to the next step.
• You will now apply our 1K Clearcoat to the Chrome to "seal" and allow to dry. (Air dry 60 minutes or Bake 140 F for 15 minutes).
• Apply the 2K Show Clear and allow to dry, If you are applying this to a object that will be handled frequently or exposed to the elements you will want to apply our 2K Show Clear.

Description:

Crystal brings you a free flowing colour change (Flip Paint) unlike any other coating seen before. For the most dramatic effect apply Crystal over a dark coloured Basecoat but it can be applied over a light coloured Basecoat for a softer iridescent look, yet still intense colour change. The colour possibility is endless and brings a new dimension to your product.

For best performance use Custom Paints Reducer and Mix 2-1

Crystal Colours:

• Crystal Blue
• Crystal Gold
• Crystal Green

Crystal CANZ:

Our award winning Crystal is now available in an aerosol can. Crystal CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or Spray Gun cleaning. 

To get the best result from Crystal CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Crystal Paint Kits:

Crystal 1 Litre Kit: Amazing Value!!!

• 1 Litre of Basecoat (Any Colour)
• 1 Litre of Crystal (Any Colour)
• 1 Litre of D-Thinner
• 1 Litre of 2K Show Clear (includes Activator)

Crystal 3 Litre Kit: Amazing Value!!!

• 3 Litres of Basecoat (Any Colour)
• 3 Litres of Crystal (Any Colour)
• 3 Litres of D-Thinner
• 3 Litres of 2K Show Clear (includes Activator)

Application:

Crystal Flip Paints are easy to apply and can even be applied with an airbrush. For best results use a Black Basecoat but using different colours will give you a real custom effect. Crystal Colours can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Mix Crystal 2-1 with Reducer and stir well.
• Apply 2-5 coats of Crystal depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply 2K Show Clear for a Real Deep Gloss finish.

Description:

ICE FX is a self-activated coating that works over a smooth or sanded surface and achieves full crystallization in about 10-20 minutes. Using ICE FX, you have the ability to create the final unique pattern and effects which are truly amazing!

Apply ICE FX on motorcycle tanks and guards, feature panels on motor cars, trucks, caravans, boats, jet ski's, surfboards, skateboards, bench, counter tops and almost any other object.

Application:

ICE FX is inexpensive and simple to use, with a little practice almost anyone can become an expert. Simply follow our easy to follow step-by-step instructions.

• Prepare and paint the surface with your choice of our Base colour. This Base colour will become the colour that shows the lines through the crystals.
• Apply the ICE FX in a lighter coat for small crystals, and a wet or heavy coat to achieve the large crystal effect across the surface.
• ICE FX will achieve full crystallization usually within 10-20 minutes at an average temperature of 20C - 25C. Wait for complete forming of crystals on the entire area you are working on.
• By applying heat you can force the crystals to dry quickly, this will result in a small tight woven crystals. While allowing them to air dry will produce larger, spaced crystals.
• Once dry, now apply your contrasting color (the color that will be shown through the spaces in the crystals). Apply this coat in a light dusting action. Note: Take care to apply only light coats, as a wet coat of paint will make it hard to remove the crystals.
• Using lots of warm water and a rag or sponge, scrub off the crystals. This will leave you with a very pronounced crystal design.
• Allow any excess water to dry.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Description:

Liquid custom colours are used to produce colour-changing paint (Flip Paint) finishes that range from very subtle to very dramatic. The colour of the Basecoat applied under the Midcoat dramatically effects the final colour and shift colour. Dark coloured Basecoats provide the most colour change, with light coloured Basecoats providing clear and sophisticated pastel and opalescent colour shifts. Each Liquid custom product has the potential to produce an infinite number of colour shift effects depending on Basecoat colour selection.

For best performance use Custom Paints Reducer and Mix 2-1

Liquid Colours:

• Liquid Charcoal - Shifts from Gray to Green to Blue
• Liquid Emerald - Shifts from Green to Blue
• Liquid Gold - Shifts from Gold to Green to Blue
• Liquid Purple - Shifts from Purple to Red to Gold to Green

Liquid CANZ:

Our award winning Liquid is now available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or Spray Gun cleaning.

To get the best result from Liquid CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Liquid Paint Kits:

Liquid 1 Litre Kit: Amazing Value!!!

• 1 Litre of Basecoat (Any Colour)
• 1 Litre of Liquid (Any Colour)
• 1 Litre of D-Thinner
• 1 Litre of 2K Show Clear (includes Activator)

Liquid 3 Litre Kit: Amazing Value!!!

• 3 Litres of Basecoat (Any Colour)
• 3 Litres of Liquid (Any Colour)
• 3 Litres of D-Thinner
• 3 Litres of 2K Show Clear (includes Activator)

Application:

Liquid coatings are easy to apply and can even be applied with an airbrush. For best results use a Black Basecoat, but using different colours will give you a real custom effect. Liquid colours can also mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Mix Liquid 2-1 with D-Thinner and stir well.
• Apply 3-4 coats of Liquid depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply 2-3 coats of 2K Show Clear for a Real Deep Gloss finish.

Description:

Lumo brings you the brightest custom paint finish. Lumo paint is a high visibility fluorescent coating in daylight and artificial light. Please remember to pick your application of this product carefully, it has limited lightfastness. USE WITH DISCRETION.

For best performance use Custom Paints Reducer and Mix 2-1

Lumo Colours:

• Green Lumo
• Orange Lumo
• Pink Lumo
• Red Lumo
• Yellow Lumo

Lumo CANZ:

Our award winning Lumo is now available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or Spray Gun cleaning.

To get the best result from Lumo CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Lumo Paint Kits:

Lumo 1 Litre Kit: Amazing Value!!!

• 1 Litre of White Basecoat
• 1 Litre of Lumo (Any Colour)
• 1 Litre of D-Thinner
• 1 Litre of 2K Show Clear (includes Activator)

Lumo 3 Litre Kit: Amazing Value!!!

• 3 Litres of White Basecoat
• 3 Litres of Lumo (Any Colour)
• 3 Litres of D-Thinner
• 3 Litres of 2K Show Clear (includes Activator)

Application:

Lumo coatings are easy to apply and can even be applied with an airbrush. For best results use a White Basecoat. Please remember to pick your application of this product carefully, it has limited lightfastness. USE WITH DISCRETION.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Mix Lumo 2-1 with Reducer and stir well.
• Apply 3-6 coats of Lumo depending on the effect you desire, leaving 15 minutes between coats. 
• Apply 2K Show Clear HI-UV Clearcoat for a Real Deep Gloss finish. IMPORTANT: Ensure Clearcoat is fully dry before removing from spray booth. This is to ensure daylight doesn't shine on paint work until fully dry giving full protection to the Lumo coating.

Description:

Marble offers you an exciting paint finish. With Marble you can achieve the appearance of a deep marble, snake skin, plus many other effects. Marble is applied as a Midcoat that can simply be cleared over or try it with our Candy Paints. 

(Note: This is a Water Based Coating)

Marble Colours:

• Aluminium Marble
• Blue Marble
• Gold Marble
• Green Marble
• Purple Marble
• Red Marble
• Silver Marble

Marble Paint Kits:

Marble 1 Litre Kit: Amazing Value!!!

• 1 Litre of Black Basecoat
• 1 Litre of Marble (Any Colour)
• 1 Litre of Reducer
• 1 Litre of 2K Show Clear (includes Activator)

Marble 3 Litre Kit: Amazing Value!!!

• 3 Litres of Black Basecoat
• 3 Litres of Marble (Any Colour)
• 3 Litres of Reducer
• 3 Litres of 2K Show Clear (includes Activator)

Application:

Marble is easy to apply and can even be applied with an airbrush. For best results use a Black Basecoat, but using different colours will give you a real custom effect.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats. Wait 1 hour before applying the Marble Effect to ensure Basecoat is fully dry.
• Stir Marble well. Marble is ready to use.
• Apply 1-2 thin WET coats. Immediately use cling wrap, plastic sheeting or your choice of texturing tool to produce the desired effect. Apply cling wrap to the entire part, then rub the cling wrap down with your hand to insure contact with surface. Remove the cling wrap, leaving you with a marble like finish.
• Allow 1-2 hours drying time before applying a Candy or a 2K Clearcoat.

Description:

Marble FX offers you an exciting paint finish. With Marble FX you can achieve many effects including a deep marble or snake skin appearance with a changing colour effect. Marble FX is applied as a Midcoat that can be simply cleared over or try our Candy effect paint over the top.

Marble FX Colours:

• Blue Marble FX
  
• Desert Marble FX
• Green Marble FX
• Kiwi Marble FX
• Purple Marble FX

Marble FX Paint Kits:

Marble FX 1 Litre Kit: Amazing Value!!!

• 1 Litre of Black Basecoat
• 1 Litre of Marble FX (Any Colour)
• 1 Litre of Reducer
• 1 Litre of 2K Show Clear (includes Activator)

Marble FX 3 Litre Kit: Amazing Value!!!

• 3 Litres of Black Basecoat
• 3 Litres of Marble FX (Any Colour)
• 3 Litres of Reducer
• 3 Litres of 2K Show Clear (includes Activator)

Application:

Marble FX is easy to apply and can even be applied with an airbrush. For best results use a Black Basecoat but using different colours will give you a real custom effect.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats. Wait 1 hour before applying the Marble FX effect to ensure Basecoat is fully dry.
• Stir Marble FX well. Marble FX is ready to use.
• Apply 1-2 thin WET coats. Immediately use cling wrap, plastic sheeting or your choice of texturing tool to produce the desired effect. Apply cling wrap to the entire part, then rub the cling wrap down with your hand to insure contact with surface. Remove the cling wrap, leaving you with a marble like finish.
• Allow 1-2 hours drying time before applying a Candy or a 2K Clear coat.

Description:

Our High Performance Military Colours are intermixable to create thousands of base colours. Military Colours can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paints, etc.

For best performance use Custom Paints D-Thinner and Mix 2-1

Military Colours:

• Battleship Grey
• Black Shadow
• Blood Stripe
• Brown Leather
• Dark Tan
• Delta Grey
• Destroyer Grey
• Federal Yellow
• Ghost Grey
• Jungle
• Navy Blue
• Olive Drab
• Sand Dune 
• Storm White 
• Swamp Green

Military CANZ:

Our Military Colours are now available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or Spray Gun cleaning.

To get the best result from Military CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Military Colours are easy to apply and can even be applied with an airbrush.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix Basecoat 2-1 with D-Thinner and stir well.
• Apply 2-3 coats, leave 10-15 minutes between coats.
• Apply effect colour or 2K Show Clear for a Real Deep Gloss finish.

Description:

Passion brings you a smooth, free flowing colour change (Flip Paint) unlike any other coating seen before. For the most dramatic effect, Passion is applied over a Black Basecoat but can be applied over a lighter Basecoat for a softer, iridescent look yet still intense colour change. The colour possibility is endless and brings a new dimension to your product.

For best performance use Custom Paints Reducer and Mix 2-1

Passion Colours:

• Blue Passion - Shifts from Turquoise to Blue to Purple
• Desert Passion - Shifts from Pinky Red to Gold to Green
• Green Passion - Shifts from Green Turquoise to Bright Silver to Red to Gold
  
• Kiwi Passion - Shifts from Green to Silver to Red to Orange
• Purple Passion - Shifts from Strong Purple to Silver to Green to Blue
• Tropical Passion - Shifts from Gold to Silvery Green to Deep Blue

Passion CANZ:

Our award winning Passion is now available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or Spray Gun cleaning.

To get the best result from Passion CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Passion Paint Kits:

Passion 1 Litre Kit: Amazing Value!!!

• 1 Litre of Basecoat (Any Colour)
• 1 Litre of Passion (Any Colour)
• 1 Litre of Reducer
• 1 Litre of 2K Show Clear (includes Activator)

Passion 3 Litre Kit: Amazing Value!!!

• 3 Litres of Basecoat (Any Colour)
• 3 Litres of Passion (Any Colour)
• 3 Litres of Reducer
• 3 Litres of 2K Show Clear (includes Activator)

Application:

Passion is easy to apply and can even be applied with an airbrush. For best results use a Black Basecoat but using different colours will give you a real custom effect. Passion Colours can also mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Mix Passion 2-1 with Reducer and stir well.
• Apply 2-4 coats of Passion depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Description:

Our Pearls are the very best on the planet. Our Pearls exhibit the brightest and most vivid colours. Apply our Pearls over any Base colour to produce a real custom effect.

For best performance use Custom Paints Reducer and Mix 2-1

Pearl Colours:

• Blue Pearl
• Gold Pearl
• Green Pearl
• Indigo Pearl
• Orange Pearl
• Magenta Pearl
• Purple Pearl
• Red Pearl
• Silver Pearl
• Solid Copper Pearl
• Solid Rich Gold Pearl
• Turquoise Pearl

Pearl CANZ:

Our award winning Pearls are now available in an aerosol can. Pearl CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or Spray Gun cleaning.

To get the best result from Pearl CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Pearl Paint Kits:

Pearl 1 Litre Kit: Amazing Value!!!

• 1 Litre of Basecoat (Any Colour)
• 1 Litre of Pearl (Any Colour)
• 1 Litre of D-Thinner
• 1 Litre of 2K Show Clear (includes Activator)

Pearl 3 Litre Kit: Amazing Value!!!

• 3 Litres of Basecoat (Any Colour)
• 3 Litres of Pearl (Any Colour)
• 3 Litres of D-Thinner
• 3 Litres of 2K Show Clear (includes Activator)

Application:

Pearls are easy to apply and can even be applied with an airbrush. Apply Pearls over any colour Basecoat, but Pearl colours can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat.
• Mix Pearl 2-1 with Reducer and stir well.
• Apply 2-4 coats of Pearl depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply 2K Show Clear for a Real Deep Gloss finish.

Description:

Prismacoat is one of our most unique coatings created yet.

Prismacoat is one of our brightest and most dramatic coatings.

In dim light it appears to look like a highly polished/reflective Silver, but when exposed to bright light the entire spectrum explodes into life giving you the most vibrant coating ever seen.

One Litre of Prismacoat is equal to about 3 Litres of conventional Basecoat and no Reducer or Catalyst is required.

Just pour it in your gun and spray. When you have finished, simply pour back into container to use later.

MAX POWER AUTOMOTIVE SHOW 2005 awarded Prismacoat "Best New Product"!

Application:

Coming Soon

Description:

Rainbow XL are based on a unique pigment that sparkles and shimmers through the light spectrum when viewed from different angles. Rounded, curved surfaces and sharp angles will highlight the magical appearance of Rainbow XL.

For best performance use Custom Paints Reducer and Mix 2-1

Rainbow XL Colours:

• Fuchsia
• Gold
  
• Green
• Pink
• Red
• Sapphire
• Silver
• Violet

Rainbow XL CANZ:

Our award winning Rainbow XL is now available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or Spray Gun cleaning.

To get the best result from Rainbow XL CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Rainbow XL Paint Kits:

Rainbow XL 1 Litre Kit: Amazing Value!!!

• 1 Litre of Basecoat (Any Colour)
• 1 Litre of Rainbow XL (Any Colour)
• 1 Litre of Reducer
• 1 Litre of 2k Show Clear (includes Activator)

Rainbow XL 3 Litre Kit: Amazing Value!!!

• 3 Litres of Basecoat (Any Colour)
• 3 Litres of Rainbow XL (Any Colour)
• 3 Litres of Reducer
• 3 Litres of 2K Show Clear (includes Activator)

Application:

Rainbow XL is easy to apply and can even be applied with an airbrush. For best results use a Black, Silver or Gold Basecoat but using different colours will give you a real custom effect. Rainbow XL colours can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Mix Rainbow XL 2-1 with Reducer and stir well.
• Apply 2-4 coats of Rainbow XL depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Description:

Shadow Chrome produces the most realistic Metallic Paint finishes available. Anyone can reproduce the authentic look of real metal in minutes. Shadow Chrome can be found on a variety of OEM applications ranging from Alloy wheels to interior components.

Shadow Chrome CANZ:

Shadow Chrome is now available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or Spray Gun cleaning.

To get the best result from Shadow Chrome CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Shadow Chrome is easy to apply and can even be applied with an airbrush. The Basecoat plays an important role. 

The colour of the Basecoat determines the obtained Shadow Chrome effect. If the Basecoat is dark (black, dark blue, etc.) you will obtain a darker Shadow Chrome effect. If applied over a light coloured Basecoat (white, grey, silver, etc.) you will obtain a lighter Shadow Chrome effect. You will notice a difference by using a satin or gloss finish when applying the Shadow Chrome. 

• 1st Step if you've never sprayed this product is to do test samples, or call our help line and get guidance to apply this product correctly, as this will not be sprayed the same as a regular base coat paint.
• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats. Allow 1 hour drying time before applying Shadow Chrome.
• When opening the bottle, stir Shadow Chrome well. Do not apply full or heavy coats as this can cause a patchy appearance on the finished panel. The best application method is to apply very light coats to build up the appearance required. Allow 15 minutes flash off time between coats. Spray object in one continuous pass rather then individual panels to avoid film build up on the edge of panels, which could cause a patchy appearance on the finished panel. Allow flash off time between coats.
• Allow 1 hour drying time before applying the clear coat.
• Apply 2K Clearcoat for a Real Deep Gloss finish.

Description:

Shimmer is a unique coating that has a tremendous sparkling effect in a bright light, but in normal light will give you a subtle metallic look. Shimmer is easily applied by normal spraying equipment but can also be sprayed with an airbrush. Apply Shimmer over any colour Basecoat for novel effects, but also mixing different Shimmer colours will give you a real custom effect. Apply our Candy colours over the top of Shimmer to give a real "pop" to the Candy effect.

Shimmer Colours:

• Blue Shimmer
• Gold Shimmer
• Green Shimmer
• Purple Shimmer
• Red Shimmer
• Silver Shimmer

Shimmer CANZ:

Our award winning Shimmer is now available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

To get the best result from Shimmer CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Shimmer Paint Kits:

Shimmer 1 Litre Kit: Amazing Value!!!

• 1 Litre of Black Basecoat
• 1 Litre of Shimmer (Any Colour)
• 1 Litre of D-Thinner
• 1 Litre of 2K Show Clear (Includes Activator)

Shimmer 3 Litre Kit: Amazing Value!!!

• 3 Litres of Black Basecoat
• 3 Litres of Shimmer (Any Colour)
• 3 Litres of D-Thinner
• 3 Litres of 2K Show Clear (Includes Activator)

Application:

Shimmer is easy to apply and can even be applied with an airbrush. Apply Shimmer over any colour Basecoat, but for great results use over a Black Basecoat. Shimmer colours can also mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Mix Shimmer 2-1 with Reducer and stir well.
• Apply 2-5 WET coats of Shimmer depending on the effect you desire. 
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Description:

Our Sparkle Pearls are the very best on the planet. Sparkle Pearls exhibit the brightest and most vivid colours due to their large size and give a sparkle effect in bright light/sun light. Sparkle Pearls are like no other pearls on the market as each colour gives off colours within the colour pearl. Apply Sparkle Pearls over any Basecoat colour to produce a real custom effect.

For best performance use Custom Paints Reducer and Mix 2-1

Sparkle Pearl Colours:

• Blue Sparkle Pearl
• Copper Sparkle Pearl
• Fire Gold Pearl
• Gold Sparkle Pearl
• Green Sparkle Pearl
• Purple Sparkle Pearl
• Rainbow Sparkle Pearl
• Red Sparkle Pearl
• Silver Sparkle Pearl
• Super Copper Pearl
• Turquoise Sparkle Pearl

Sparkle Pearl CANZ:

Our award winning Sparkle Pearl is now available in a aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or Spray Gun cleaning.

To get the best result from Sparkle Pearl CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Sparkle Pearl Paint Kits:

Sparkle Pearl 1 Litre Kit: Amazing Value!!!

• 1 Litre of Basecoat (Any Colour)
• 1 Litre of Sparkle Pearl (Any Colour)
• 1 Litre of D-Thinner
• 1 Litre of 2K Show Clear (includes Activator)

Sparkle Pearl 3 Litre Kit: Amazing Value!!!

• 3 Litres of Basecoat (Any Colour)
• 3 Litres of Sparkle Pearl (Any Colour)
• 3 Litres of D-Thinner
• 3 Litres of 2K Show Clear (includes Activator)

Application:

Sparkle Pearl is easy to apply and can even be applied with an airbrush. Apply Sparkle Pearl over any colour Basecoat. Sparkle Pearl colours can also be mixed with our other products: Candy, Spectracoat, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Mix Sparkle Pearl 2-1 with Reducer and stir well.
• Apply 2-4 coats of Sparkle Pearl depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Description:

Spectracoat is a Prismatic tidal wave which creates alluring 3D iridescent colours that appear to move right before your eyes! Spectracoat looks like Liquid Silver in low light and a flowing Liquid Silver rainbow in bright light. Rounded, curved surfaces and sharp angles will highlight the magical appearance of Spectracoat. 

For best performance use Custom Paints Reducer and Mix 2-1

Spectracoat Colours:

• Spectracoat Black
• Spectracoat Blue
• Spectracoat Gold
• Spectracoat Green
• Spectracoat Gunmetal
• Spectracoat Light Blue
• Spectracoat Light Green
• Spectracoat Light Pink
• Spectracoat Light Purple
• Spectracoat Pink
• Spectracoat Purple
• Spectracoat Red
• Spectracoat Silver
• Spectracoat Yellow

Spectracoat CANZ:

Our award winning Spectracoat is available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or Spray Gun cleaning.

To get the best result from Spectracoat CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Spectracoat Paint Kits:

Spectracoat 1 Litre Kit: Amazing Value!!!

• 1 Litre of Base Light Grey (Base Black for Spectracoat Black and Spectracoat Gunmetal)
• 1 Litre of Spectracoat (any colour)
• 1 Litre of D-Thinner
• 1 Litre of 2K Show Clear (includes Activator)

Spectracoat 3 Litre Kit: Amazing Value!!!

• 3 Litres of Base Light Grey (Base Black for Spectracoat Black and Spectracoat Gunmetal)
• 3 Litres of Spectracoat (any colour)
• 3 Litres of D-Thinner
• 3 Litres of 2K Show Clear (includes Activator)

Application:

Spectracoat is easy to apply and can even be applied with an airbrush. Apply Spectracoat over any coloured Basecoat, but using different colours will give you a real custom effect. Spectracoat colours can also be mixed with our other products: Candy, Sparkle Pearl, Pearl, Flip Paint, etc. 

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Base coat.
• Mix Spectracoat 2-1 with Reducer and stir well.
• Apply 2-4 coats of Spectracoat depending on the effect you desire. Leave 10-15 minutes between coats. 
• For best results use our 2K Show Clear for a Real Deep Gloss finish.

Description:

Spectrum FX are based on a unique pigment that sparkle and shimmer through the light spectrum when viewed from different angles. Rounded, curved surfaces and sharp angles will highlight the magical appearance of Spectrum FX.

Spectrum FX Colours:

• Currently only available in Silver

Spectrum FX CANZ:

Our award winning Spectrum FX is now available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or Spray Gun cleaning.

To get the best result from Spectrum FX CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Spectrum FX Paint Kits:

Spectrum FX 1 Litre Kit: Amazing Value!!!

• 1 Litre of Basecoat Black (other colours available upon request)
• 1 Litre of Spectrum FX
• 1 Litre of D-Thinner
• 1 Litre of 2K Show Clear (includes Activator)

Spectrum FX 3 Litre Kit: Amazing Value!!!

• 3 Litres of Basecoat Black (other colours available upon request)
• 3 Litres of Spectrum FX
• 3 Litres of D-Thinner
• 3 Litres of 2K Show Clear (includes Activator)

Application:

Spectrum FX is easy to apply and can even be applied with an airbrush. For best results use a Black, Silver or Gold Basecoat, but using different colours will give you a real custom effect. Spectrum FX colours can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Ensure Bottle/Tin is shaken or stirred well before pouring due to settling.
• Mix Spectrum FX 2-1 with Reducer and stir well.
• Apply 1-4 coats of Spectrum FX depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Description:

D-Thinner is a high quality Reducer for all our base colours and effects.

Storage:

Shelf life 12 months. Highly Flammable liquid, store and use in accordance with the flammable liquid regulations.

Description:

Metalflake Carrier has been specially formulated as a carrier for our Metal Flake range. 

Metalflake Carrier has excellent film build and adhesion, beautiful flow and levelling characteristics. It has minimum sag and good vertical stability which is so important when working with Metalflake.

Application:

Metalflake Carrier is easy to apply and can even be applied by a airbrush.

• (Always spray test panels before spraying you product or project)
• Mix Base 2-1 with Reducer and stir well. 
• add metal flake and stir well. 
• Apply 1-3 coats Leave 10-15 minutes between coats. 
• Apply effect colour or 2k Show Clear for a Real Deep Gloss finish.

Description:

Intercoat Clear can be used as a protective inter-coat. 

Intercoat Clear has excellent film build and adhesion, beautiful flow characteristics and superb levelling. It has minimum sag and good vertical stability which is so important when working with specialist additives.

Application:

Base Coats are easy to apply and can even be applied by a airbrush.

• (Always spray test panels before spraying you product or project)
• Mix Base 2-1 with Reducer and stir well. 
• add dry pearl or metal flake and stir well should you be using as a carrier. 
• Apply 1-3 coats Leave 10-15 minutes between coats. 
• Apply effect colour or 2k Show Clear for a Real Deep Gloss finish.

Speed Shapes:

Custom Paints offers you our Custom Paint Shapes. The Custom Paint Shapes are Injection moulded and made of a Sturdy ABS construction. Our Custom range of paints can be applied directly to ABS without having to use a Primer on the shapes.

The Custom Paints Shapes have two legs on them which can be used to help display them on to a board. The Legs can also be removed easily to lay them flat.

All Paints Shapes come in White. Size: 14.8cm x 7.4cm

CUSTOM PAINTS DOMES:

Custom Paints offers you our branded domes made of sturdy injection moulded ABS.

Our domes include a mounting hole which allows you to hang these to create your own eye catching display.

• Size:       127mm
• Colour:   Natural

Description:

2K Thinner

Storage:

Shelf life 12 months. Highly Flammable liquid, store and use in accordance with the flammable liquid regulations.

Description

Gun Wash is a solvent based cleaning product designed specifically for the purpose of cleaning paint spray guns, spray equipment, brushes, containers etc. It is formulated as a budget cost solvent mix and is recommended for use in paint equipment cleaning applications only

For safety do not overnight soak spray guns.

Size: 

1 Litre

2.5 Litres

5 Litres